ctmustang
Member
- 714
- 1
- 18
- Location
- Thomasville-N.C.
I am going to submit my 97 tonite and was wandering so I only have to do it 1 time what are you fellas putting for the weight and then the GVWR on a deuce?
Thanks CT
Thanks CT
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
sf97 - deuce
- Thread starter ctmustang
- Start date
flyxpl
New member
- 717
- 9
- 0
- Location
- Chatham IL
I copied the specs right off the data plate on the dash .
bulldog_mack13
3/3 ACR
- 2,968
- 34
- 0
- Location
- Colo Springs, CO
Its on the dash ,what the empty weight and GVWR are. Anything else would be an illegal act right? Jay
- 1,079
- 57
- 48
- Location
- New Palestine Indiana
ctmustang
Member
- 714
- 1
- 18
- Location
- Thomasville-N.C.
I remember it being on the dash but it is not on this deuce. If someone could read theirs and post it here I'd appreciate it.
CT
CT
DieselBob
Active member
- 2,891
- 15
- 38
- Location
- Arnold Maryland
From TM 43-0001-31
Nomenclature: TRUCK, CARGO: 2 1/2 Ton, 6x6
Weight: 13,700 lb
Payload: 10,350 lb, Off Road: 7,000 lb
The GVWR would be 13700 lb + 10350 lb = 24050 lb
Nomenclature: TRUCK, CARGO: 2 1/2 Ton, 6x6
Weight: 13,700 lb
Payload: 10,350 lb, Off Road: 7,000 lb
The GVWR would be 13700 lb + 10350 lb = 24050 lb
Last edited:
- 5,363
- 3,365
- 113
- Location
- Lexington, South Carolina
I used that on my first deuce, after that I have used the expected max cargo weight in my use, which is far less (only about 3 or 4 thousand pounds). I also tell the clerks it will be empty most of the time (which is true). Makes about $90 a year difference on the price of the tags. YMMV