• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Slant back seal

R

rcamacho

Well-known member
770
839
93
Location
Bainbridge Island Wa
Q: Is adhesive indicated where the seal metal lip joins the hatch? Just got a new seal for installation. Looks like I also have to R&R one armor panel that sandwiches the upper part of the seal.





RT side molded plastic in place.

Sent from my iPhone using Tapatalk

LT trim piece missing
 
Last edited:
R

rcamacho

Well-known member
770
839
93
Location
Bainbridge Island Wa
Finished installing new seal today. Armor plate removal was a PITA. Lots of corrosion to deal with on fasteners and some base corrosion on plate and hatch.

Last pictures illustrate missing plastic trim piece on the upper LT corner of the hatch.







Sent from my iPhone using Tapatalk
 
R

rcamacho

Well-known member
770
839
93
Location
Bainbridge Island Wa
SETOYOTA said:
You may want the seal covers .
Click to expand...
Yeah, I'm interested in the blast shield seal covers as well. Looks like my cargo shell deck is not drilled for them. I gather this was optional on the 1151a1 or a field installation? Noticed a few 1151a1/1167's on GP that had the blast shields installed along with a few more trim pieces at the top of the deck.
 

Attachments

Retiredwarhorses

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,397
4,181
113
Location
Brentwood, Calif
rcamacho said:
Yeah, I'm interested in the blast shield seal covers as well. Looks like my cargo shell deck is not drilled for them. I gather this was optional on the 1151a1 or a field installation? Noticed a few 1151a1/1167's on GP that had the blast shields installed along with a few more trim pieces at the top of the deck.
Click to expand...
the covers are only installed on TOW variant, not for the M1151 armament carriers
 
M

Mk23

Active member
Steel Soldiers Supporter
124
81
28
Location
Port Angeles, WA
So I am in the same place you were before. M1151A1 out of Yermo. Shot/missing hatch seals. I have the new ones from Mac. It looks like I have the same Armor plate you struggled with removing at top of hatch. Any tip on how to remove it? And then hatch seal just clips in all the way around?

rcamacho said:
Finished installing new seal today. Armor plate removal was a PITA. Lots of corrosion to deal with on fasteners and some base corrosion on plate and hatch.

Last pictures illustrate missing plastic trim piece on the upper LT corner of the hatch.







Sent from my iPhone using Tapatalk
Click to expand...
m1151A1 Rear.jpg
 
R

rcamacho

Well-known member
770
839
93
Location
Bainbridge Island Wa
Mk23 said:
So I am in the same place you were before. M1151A1 out of Yermo. Shot/missing hatch seals. I have the new ones from Mac. It looks like I have the same Armor plate you struggled with removing at top of hatch. Any tip on how to remove it? And then hatch seal just clips in all the way around?

View attachment 877074e
Click to expand...
The footman loops and one bracket have to be removed in order to lift the armor plate off the hatch. Suggest using a lift of a few extra hands on the plate to avoid damaging the hatch. After that, the seal installation is relatively straightforward.
 
M

Mk23

Active member
Steel Soldiers Supporter
124
81
28
Location
Port Angeles, WA
Thank you!!! I assume you mean the bracket on the top left of the plate?

Alright, I'll get on removing mine then... Are you leaving your plate off?

rcamacho said:
The footman loops and one bracket have to be removed in order to lift the armor plate off the hatch. Suggest using a lift of a few extra hands on the plate to avoid damaging the hatch. After that, the seal installation is relatively straightforward.
Click to expand...
 
You must log in or register to reply here.
110,879members
165,311threads
2,326,197posts
2,081online users
Top