Socket Size Front Wheels

[Finallygotone]

I had a wheel bearing lock up on the left side, it tore the nut up pretty bad, did not hear anything but a growl and bite, drove it slow to the house, sure hope I can get it off with out damage, advice from you fellow who have been there would help, guess I am taking heating with the torch and cutting with a chisel, will repack both hubs with seals and bearings, those nuts are the 4 3/8" and 4 7/8, if so I can get them on order, almost forgot, it is a M9393A2, thanks for the help in advance, Joe

 

[topo]

Check on E-Bay sometimes new or used show up

 

[Ajax MD]

Part numbers: OTC-1917 & OTC-1919. Google that and a multitude of suppliers pop up. Anything from NAPA to Amazon.

 

[Finallygotone]

ToPo, Ajax MD, Thanks, I will look those numbers up, was just trying to find out if those sizes were correct had found two on Ebay but they went out this weekend, thanks, Joe

 

[juanprado]

Just make sure they are 8 point!

 

[Ajax MD]

Just make sure they are 8 point!

Those part numbers are for 8-point sockets. I just double-checked. Thanks for the heart attack, I thought I ordered the wrong tool for a moment!

 

[Finallygotone]

got them ordered, one side will have to be cut off, I will send a pic maybe some of you can point me in the right direction, the left front hub made no noise prier to the sharp height pit chick bite I hope I can get the nut off and get it apart, post tomorrow night, Joe