lrjet23
Member
- 43
- 0
- 6
- Location
- Ponce Inlet, FL
In the middle of moving. San Antonio to Daytona Beach, and I am in Beaumont, TX.. Started out at 0700, and all was well. (Now, before everyone says do a search, and look at the TM's, I spent the last five hours doing just that.) So, if anyone saw a eastbound deuce on I-10, holding up traffic, well that was me.
Problem:
Just getting on I-10 out of SAT, a slght noise coming from the drivetrain. Don't know if it is transmission, T-case, or clutch. BTW I heard the same noise when I took her for the first 50 mile run, however I split it into two segments with a rest in between. Also changed the transmission oil two days ago, with Valvoline 80-90 that meet the mil spec. (So I think) Stopped at the gas station by the BAE systems, (Nice MV's there) and noticed the line from the T-Case, the bigger one, was leaking. (Ithought it was the tach, but after reading tonite, its a line of some sort. Mabey the fluid in the no.2 air tank?) Lots of fittings on there, and I didn't have a stubby 1" wrench. (Airpack was in the way to get a good turn) I tightened it as best as I could, with a standard wrench, and checked the fluid. Still within tolerance. So I push on.
I stopped at a picnic area just before Houston to give her a break, and check the T-Case fluid once again. The leak pretty much stopped, and I topped off the T-Case. Took about a half qt. Everything else is good, off we go.
Getting through downtown Houston, the noise is getting louder. At first, I bearly heard it at a steady speed. Now, she growling, and grinding, and getting very angry. Made it through Houston, and stopped as soon as I could. I pushed the clutch in, and made a noise. Almost the same as in cruise, but slightly different. (BTW I kept her at 45 mph, @ about 2000 rpm, speed backed up by GPS) Idled down, quick oil check, T-Case, and transmission oil check, all was full. Sitting there trying to figure what is up, pulled out the LO 209-12-1, and saw I missed a zert for the clutch Throw-out bearing. Hit it with the gun. Now that i'm looking the the LO, I still may have not found it. I may have got one of the throw-out shaft zerts instead. Hmmmmm.
Anyway, I'm in Beaumont waiting for the sun to appear to get looking for a for more zerts, I may have missed. I do not believe the noise I am hearing is due to the lack of GAA grese, but mabey.
Summary:
A spattering noise with clutch engauged
Constant noise (getting worse) at cruise
All gears work... (for now)
Low t-case in 1st gear, and R = no noise, didn't try the rest
All fluids full, not leaking
I have the floor cover off now for the a.m., and one of the TM's said there was a breather for the transmission? Wrong TM? Also, when I remove the T-Case filler cap there is just a slight hiss like it's pressurized? Something clogged?
Questions, Please ask Open for any input
Thanks
P.S. Pics will be soon, I have to make em smaller
Problem:
Just getting on I-10 out of SAT, a slght noise coming from the drivetrain. Don't know if it is transmission, T-case, or clutch. BTW I heard the same noise when I took her for the first 50 mile run, however I split it into two segments with a rest in between. Also changed the transmission oil two days ago, with Valvoline 80-90 that meet the mil spec. (So I think) Stopped at the gas station by the BAE systems, (Nice MV's there) and noticed the line from the T-Case, the bigger one, was leaking. (Ithought it was the tach, but after reading tonite, its a line of some sort. Mabey the fluid in the no.2 air tank?) Lots of fittings on there, and I didn't have a stubby 1" wrench. (Airpack was in the way to get a good turn) I tightened it as best as I could, with a standard wrench, and checked the fluid. Still within tolerance. So I push on.
I stopped at a picnic area just before Houston to give her a break, and check the T-Case fluid once again. The leak pretty much stopped, and I topped off the T-Case. Took about a half qt. Everything else is good, off we go.
Getting through downtown Houston, the noise is getting louder. At first, I bearly heard it at a steady speed. Now, she growling, and grinding, and getting very angry. Made it through Houston, and stopped as soon as I could. I pushed the clutch in, and made a noise. Almost the same as in cruise, but slightly different. (BTW I kept her at 45 mph, @ about 2000 rpm, speed backed up by GPS) Idled down, quick oil check, T-Case, and transmission oil check, all was full. Sitting there trying to figure what is up, pulled out the LO 209-12-1, and saw I missed a zert for the clutch Throw-out bearing. Hit it with the gun. Now that i'm looking the the LO, I still may have not found it. I may have got one of the throw-out shaft zerts instead. Hmmmmm.
Anyway, I'm in Beaumont waiting for the sun to appear to get looking for a for more zerts, I may have missed. I do not believe the noise I am hearing is due to the lack of GAA grese, but mabey.
Summary:
A spattering noise with clutch engauged
Constant noise (getting worse) at cruise
All gears work... (for now)
Low t-case in 1st gear, and R = no noise, didn't try the rest
All fluids full, not leaking
I have the floor cover off now for the a.m., and one of the TM's said there was a breather for the transmission? Wrong TM? Also, when I remove the T-Case filler cap there is just a slight hiss like it's pressurized? Something clogged?
Questions, Please ask Open for any input
Thanks
P.S. Pics will be soon, I have to make em smaller