aaron92685
New member
- 73
- 0
- 0
- Location
- Elko Nv
The studs that hold the front spindles on are they grade 8 or 5? I look around and did not find what I was looking for. Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Spindle studs.
- Thread starter aaron92685
- Start date
- 3,021
- 222
- 63
- Location
- eldersburg maryland
i am sure they are at least grade 8. i would also be sure to use usa made bolts here.
Bowtie70SS
Member
- 145
- 2
- 16
- Location
- Goshen, Ohio
Correct me if I am wrong but I was under the impression that grade 5 hasd a higher shear strength. Do you have old bolts? Look at the head of the bolts they will have markings which will tell you.
- 3,021
- 222
- 63
- Location
- eldersburg maryland
the higher the number the stronger. 3 marks on head = grade 5, 6 marks = 8, 12 marks = 12
aaron92685
New member
- 73
- 0
- 0
- Location
- Elko Nv
There is no marking on the studs. Grade 8 bolts are brittle and grade 5 will stretch some before breaking. I know grade 8 is not always better.
aaron92685
New member
- 73
- 0
- 0
- Location
- Elko Nv
Just kinda wondering what others were using. Probably will use grade 8 and check them after a while.
DieselBob
Active member
- 2,891
- 15
- 38
- Location
- Arnold Maryland
I used these when I redid my front hubs. Perfect fit.
http://www.summitracing.com/parts/RNB-675-070/
http://www.summitracing.com/parts/RNB-675-070/