41WC18
New member
- 29
- 0
- 1
- Location
- Warren, ME
Been searching different places for this specific project; hoping the answers are here.
Donor is a 360 (5.9) Magnum motor from a ram 3500 van with 57k.
The electronics and fuel injection will be removed and replaced with HEI distributor, MSD box, 55026 intake manifold and Demon 650cfm carb. The Magnum exhaust manifolds will remain in service, as will the serpentine belt setup.
To be installed in my 1977 Dodge M886 with original equipment (+ power steering); being mated to the stock 727.
Anyone done this specifically? All perspectives welcome. This is going to happen - only want to do it ONCE.
Donor is a 360 (5.9) Magnum motor from a ram 3500 van with 57k.
The electronics and fuel injection will be removed and replaced with HEI distributor, MSD box, 55026 intake manifold and Demon 650cfm carb. The Magnum exhaust manifolds will remain in service, as will the serpentine belt setup.
To be installed in my 1977 Dodge M886 with original equipment (+ power steering); being mated to the stock 727.
Anyone done this specifically? All perspectives welcome. This is going to happen - only want to do it ONCE.