danoscooter
Member
- 67
- 0
- 6
- Location
- Bellevue Nebraska
First time doing anything of this magnitude. Got started on pulling out the 6.2 today. Got all fluids and electrical disconnected. Also got the flex plate bolts taken off. Ran into a stuck bolt on the transmission to the block. Sprayed it with penetrating oil and will take another hack at it in the morning.
The plan is to get all the sensors and pulleys swapped over once I get the blocks side by side. But I do have a few questions about getting the 6.2 out. Do I need to take the starter off as well as the radiator? Also when pulling the long bolts out of the motor mounts do I need to support the motor or is that unnecessary?
Anyways this should be interesting with no experience but I look forward to saying I did the work myself. Suggestions or concerns are welcome.
Thanks
Daniel
The plan is to get all the sensors and pulleys swapped over once I get the blocks side by side. But I do have a few questions about getting the 6.2 out. Do I need to take the starter off as well as the radiator? Also when pulling the long bolts out of the motor mounts do I need to support the motor or is that unnecessary?
Anyways this should be interesting with no experience but I look forward to saying I did the work myself. Suggestions or concerns are welcome.
Thanks
Daniel
Attachments
-
38.8 KB Views: 87
-
47.7 KB Views: 59
-
35.3 KB Views: 75