Torque values for M939

[Csm Davis]

Can someone please help me find the torque converter to flywheel bolts torque specifications I have looked and at this point I can't find them and yes I know that they are in the TM but after several thousand pages I give up

 

[Swamp Donkey]

Look in the -23-2 TM in Work Package 220 & 221. Not sure whether you needed for the 8.3 or the NHC250 but both are covered there.

 

[Swamp Donkey]

Look in the -23-2 TM in Work Package 220 & 221. Not sure whether you needed for the 8.3 or the NHC250 but both are covered there.

Sorry Jeff, wrong bolts in the above post.

You need Work Package 372-8 from the -23-3 TM.

Install 12 screws (Figure 6, Item 4) on flywheel (Figure 6, Item 1) and converter (Figure 6, Item in the same manner. Tighten screws 41 to 49 lb-ft (56 to 66 N·m).