Trouble: Parking Brake Assembly Removal

[mleara]

​Any ideas why part #4 will not come out of my M1026? It rotates easily but can't get it to move a fraction. Acts like it is threaded.

 

[Wire Fox]

​Any ideas why part #4 will not come out of my M1026? It rotates easily but can't get it to move a fraction. Acts like it is threaded.
View attachment 783935

You need to remove cotter pin 13, then pin 4 should slide right out. The combo of the washer and cotter pin is what retains that pin in the brake lever.

Sent from my Nokia 6.1 using Tapatalk

 

[mleara]

yes, the cotter pin and washer are off.

 

[juanprado]

I have a used assembly if you need one.
Spray penetrating oil

 

[NDT]

Grab the head of the clevis pin with vise grips then wedge a screwdriver between the assy and the jaw.

 

[mleara]

Yeh, tried that too. Used penetrating oil a couple of times over 24-hours. I’ll try a C-clamp tomorrow, maybe it will press out.


Sent from my iPad using Tapatalk