marksgarage2
New member
- 216
- 0
- 0
- Location
- Southampton, NJ
After the crash all the pics of this mod are gone. Bjorn can you repost your pics? I would like to do this mod tomorrow. Thanks Mark
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Turning up the fuel....again!
- Thread starter marksgarage2
- Start date
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
Is this what you are looking for?
1) Loosen the lock nut
2) Turn the adjusting nut clockwise (as you are facing it) to make the screw move out. This increases the fuel delivery. Try one turn for starters.
3) Tighten lock nut
The screw doesn't have to move a lot to make a difference in delivery.
As usual, it's highly recommended that you watch the EGT and boost after this procedure.
1) Loosen the lock nut
2) Turn the adjusting nut clockwise (as you are facing it) to make the screw move out. This increases the fuel delivery. Try one turn for starters.
3) Tighten lock nut
The screw doesn't have to move a lot to make a difference in delivery.
As usual, it's highly recommended that you watch the EGT and boost after this procedure.
Attachments
marksgarage2
New member
- 216
- 0
- 0
- Location
- Southampton, NJ
Thats it Bjorn. Thanks. Didn't have time to drill for the pyrometer when I had the turbo off. Had to get the truck back running. We have 2 trucks up stuck here since last weekend and another deuce last night. I will pull the turbo and drill when I can.