• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Utah - Saturday April 13th, 2019 - MV meetup and swapmeet

Valence

Well-known member
Steel Soldiers Supporter
2,112
555
113
Location
Davis County, UT
Annoucing the first of, I hope to be many for Utah, Military Vehicle meetup and swapmeet!

This is a 1/2 day meetup and swap meet will start after breakfast. We buy/sell/trade our parts/gear/vehicles. Talk, check out each other’s rides, tell tall tails, have lunch and go our separate ways by early/mid afternoon.


Bringing or owning a military vehicle is not required but is encouraged!

  • Date: Saturday, April 13th, 2019
  • Time: 9:30 am
  • Where: Smith and Edwards (their newer location), 9010 S. Redwood Road, West Jordan, UT 8408
    • See the below map for the approximate planned parking location

2 - Smith & Edwards - 9010 S. Redwood Rd, West Jordan UT 84088.jpg

Please use the rest of the thread to share items you could bring, or let fellow attendees know what you are looking for.


Note:
Yes, I have communicated this event to the Smith and Edwards owner and we have permission to be there. However, due the to limited size of this location's parking lot, if we get 20-30 confirmed vehicles showing up we'll need to move locations. Not a bad problem to have though ;)

Current confirmed attendance: 8
Valence
red
Gunzy
John D.
Blake N.
Joe M.
Jerry W.
wadefreedomvehicles
 
Last edited:

Valence

Well-known member
Steel Soldiers Supporter
2,112
555
113
Location
Davis County, UT
I'll start with things I am looking for:
  • M101A3 trailer - preferably just the rolling frame or the cheaper generator body version
  • 1 goodyear G177 11.00x20 tire


Items I potentially have for sale or trade:
  • Corner bow for M101/M105 trailers
    • 2017-07-03 10.29.46.jpg
  • Horizontal steel bow for M101/M105 trailers
    • 2017-07-03 10.27.35.jpg
  • Complete, all metal, bow for M101/M105 trailers.
    • 2019-02-27 17.23.14.jpg
  • Fiberglass front rack for M101 trailers. Good condition.
    • 2019-02-27 17.40.29.jpg
  • Gull-wing door for the older-short bodied Pioneer Tool Trailer (with hinge arms)
    • 2017-10-14 16.15.56.jpg
  • M105 rear kickdown stabilizer leg
    • 2019-02-27 17.11.46.jpg
  • Pioneer Tool shovel, USA Tempered (handle is a bit loose), ~38" long.
    • 2017-07-03 10.25.01.jpg
  • Window regulator pair (fits M44, M39, M809, M939 series)
    • 2016-10-15 18.23.56.jpg
  • Vent defroster deflectors (fits M44 and probably M39 & M809 series).
  • Desert Camo net (Lightweight Camouflage Screen). Complete with proper carry bag, large hexagon, smaller diamond net, and repair kit. Net only. (poles, battens, and stakes potentially available for extra)
    • 2017-09-16 18.41.40.jpg
  • New Red Incandescent Marker light lenses
    • 1.jpg
  • Natural white tape/lacing string .014 thick, 500 yards per spool. 7 available.
    • 2018-12-27 21.08.08.jpg
 
Last edited:

Gunzy

Well-known member
1,769
66
48
Location
Roy, Utah
I have some stuff I can bring to try to sell, have to look at it al and get picks. I plan on bringing the HEMTT and will likely have my M1082 trailer in tow.
 

Valence

Well-known member
Steel Soldiers Supporter
2,112
555
113
Location
Davis County, UT
Gunzy, if the offer is still on the table, don't forget to bring that military 12-pin plug front harness from your M101A3 to trade and I'll bring rubber shell connectors (male exterior, female interior) so you can convert your M101A3's wiring to a civillian connection.

I do have a new, never used 8ft 7-blade circular civilian front harness I got from Amazon if you'd be interested in it (I could just pre-make the connections for you too).
 
Last edited:

Gunzy

Well-known member
1,769
66
48
Location
Roy, Utah
Gunzy, if the offer is still on the table, don't forget to bring that military 12-pin plug front harness from your M101A3 to trade and I'll bring rubber shell connectors (male exterior, female interior) so you can convert your M101A3's wiring to a civillian connection.

I do have a new, never used 8ft 7-blade circular civilian front harness I got from Amazon if you'd be interested in it (I could just pre-make the connections for you too).
I still need to pull it but I'll get it off and bring it. I already have a harness built to just connect to the Packard connectors where I unplug the 12 pin from.
 

Valence

Well-known member
Steel Soldiers Supporter
2,112
555
113
Location
Davis County, UT
Final bump, this is happening TOMORROW! Weather looks amiable with a miraculous break in the rain. Dress appropriately as it’ll be a little chilly in the morning.
 

Valence

Well-known member
Steel Soldiers Supporter
2,112
555
113
Location
Davis County, UT
I'm a bit late in following up, but we had a good turn out!

We were very well received by Brian, the manager of the West Jordan Smith and Edwards location. They took some pictures and posted about the event on their Facebook page. Brian came out and perused our vehicles and hoped we would come back again. I can't think of better praise than the business inviting you back. I'm sure the dozen and a half doughnuts given to their employees didn't hurt. :mrgreen:

Here's some of the pics I took and/or saved and stole from others. :]

Waiting for the northern Convoy
2019-04-13 08.13.59.jpg

I'm the slowest so they made me lead the convoy. Heck.
My M35A2, Gunzy's HEMTT, Nacho's HMMWV, and another fellow's HMMWV who I forget their name.
2019-04-13 08.31.51.jpg 2019-04-13 08.31.51_zoom.jpg

Gunzy's HEMTT. I really like how he flys Old Glory. It's a welcome touch to any event.
2019-04-13 12.19.47.jpg 2019-04-13 12.19.56.jpg

2019-04-13 10.25.06.jpg 2019-04-13 10.24.52.jpg 2019-04-13 10.25.37.jpg 2019-04-13 10.25.51.jpg 2019-04-13 10.25.51.jpg 2019-04-13 10.25.53.jpg

This fellow bought this old gasser only ONE month prior and got it running and brakes working the night before and made it to the event!
(I missed getting pictures of the M37 seen to the left the middle picture here. A local Utah Military Vehicles Club member. He had a dummy M2HB in the bed and the kids LOVED it and his horn! He let the kids play all over the truck)
2019-04-13 11.37.20.jpg 2019-04-13 11.37.16.jpg 2019-04-13 09.50.58.jpg

Jerry's resto-mod M37 (it's HIGHLY modified, and sweet!)
The kids also liked playing with Jerry's own built remote control jeep on the hood.
2019-04-13 10.04.54.jpg 2019-04-13 10.04.58.jpg

The only "proper" way to transfer purchases. :wink:
2019-04-13 11.39.01.jpg 2019-04-13 11.39.18.jpg 2019-04-13 11.39.26.jpg 2019-04-13 11.40.43.jpg
 
Last edited:

Valence

Well-known member
Steel Soldiers Supporter
2,112
555
113
Location
Davis County, UT
Red and his CUCV
2019-04-13 12.25.34.jpg 2019-04-13 12.25.39.jpg 2019-04-13 13.31.59.jpg

Not a small job for Gunzy to maneuver his HEMTT and M1082 trailer out of the parking lot! But he did successfully back it up about 150 ft.
2019-04-13 14.17.35.jpg 2019-04-13 14.17.39.jpg

Solo trip home. My mother went with. She hates you taking pictures of her. ;)
2019-04-13 15.03.32.jpg 2019-04-13 15.04.46.jpg 2019-04-13 15.05.22.jpg 2019-04-13 08.14.54.jpg
 

Valence

Well-known member
Steel Soldiers Supporter
2,112
555
113
Location
Davis County, UT
Hahaha oh man. Well, my plans had been September. I still want to do an MV camping trip with everyone and I'm very sad I missed the Avon trail run y'all did.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks