1951M1078
Well-known member
- 1,018
- 185
- 63
- Location
- Glendale,AZ
Any idea what air ride seat base to use on my M1078 ? Looks like it needs to be a Low-profile for sure.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What Air Ride seat base ?
- Thread starter 1951M1078
- Start date
ranchhopper
Well-known member
- 1,631
- 139
- 63
- Location
- south elgin illinois
I have an air seat from a piece of heavy equipment they sit on top of a tool box they are lo pro PM me.
- 6,861
- 696
- 113
- Location
- Stratford/Connecticut
The cab has air suspension. Not much room to add a seat base the seats are basically on rails that are bolted to the cab floor. You might look into a more padded seat but the truck is a pretty comfortable ride as it is. Especially compared to the older trucks.
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
There are low profile air ride seat bases made for the medium duty trucks that are about 3" or 4" tall.
They are pricey but I have a few extras that might be available
They are pricey but I have a few extras that might be available
snowtrac nome
Well-known member
- 1,674
- 139
- 63
- Location
- western alaska
the things ride pretty good I see no reason for air ride. ive herd tail if you sit too long in the seats they get un comfortable a good set of mastercraft suspension seats like the off road market uses will cure that. we had master craft seats in the trucks equipped with lsa cabs and I could sleep sitting up in them.
1951M1078
Well-known member
- 1,018
- 185
- 63
- Location
- Glendale,AZ
Suspension seat is a great idea. Thanks.
Duckworthe
Member
- 329
- 23
- 18
- Location
- San Diego, Ca
I also use suspension seats. Works very well. I've sat in them for many hours racing Baja. MasterCraft seats are amazing but there are others just as good and cheaper. They use 550 cord stretched around the framework to support your backside. They will last just as long as any seat will. And you can get them almost any color, fabric choice, custom embroidery, on and on and on.
1951M1078
Well-known member
- 1,018
- 185
- 63
- Location
- Glendale,AZ
Playing with that now . What did you do for a mount ?
Attachments
coachgeo
Well-known member
- 5,143
- 3,461
- 113
- Location
- North of Cincy OH
Does anyone make a fold down suspension seat? A tilt Forward? Ask cause want to put a bench seat in back that folds out to a bed so need to keep the low profile of the existing seats folded or a seat that tilts forward to allow for that.
Duckworthe
Member
- 329
- 23
- 18
- Location
- San Diego, Ca
I used a square sheet of aluminum that spanned the factory floor mounts. I attached it to the seat and then put it in the truck and then put it where I wanted I, marked floor mount bolt holes on the aluminum, drilled the holes and bolted the seat down. Bam done! I also used a set of sliders so my GF can drive also.