What makes a VIC-1

[CARNAC]

Had a lot of questions about stuff I was selling so here is a layout of a basic VIC-1 system. I put out signs showing what is what but in case it doesn't show up----

Battery -> CX ? cable -> MX-7777 Surge Supressor -> CX-13908 cable -> Mount MT1029 -> CX-4723 cable -> Amplifier AM-1780 (also known as a J-Box) -> CX-4723 cable -> Control Box C-2298 (also known as a C-Box) -> headphone/microphone set


The Mount MT1029 is made to hold a 12 series radio such as the RT-524 which makes an AN/VRC-46 radio set. By adding certain components you change the radio system such as adding additional mounts and radios or adding a listening only receiver set R-442 which makes and AN/VRC-47. Other than the Mount MT-1029, none of this is shown in the photo.

Various types of microphone and headsets can be used on the C-2298 box. There are integrated ones with the microphone mounted on the headset. You can also use a separate headset and microphone as shown. Or you can use a loudspeaker and microphone. A lot of choices here.

The amplifier AM-1780 has 3 hook up positions on the top and one on the bottom for the CX-4723. The CX-4723 from Mount MT-1029 must go into the plug in point marked J-801 on the amplifier.

I hope this helps folks visualize what they need.

 

[Recovry4x4]

On mine, I cheated and used a CX4720 straight from the battery to the AM1780. The MX7777 is highly suggested.

 

[sermis]

OK what is the MX7777? I don't have a radio so I left the tray out. My AM1780 is hooked to the batterys.

 

[Boatcarpenter]

Try this.
http://www.fairradio.com/catalog.php?mode=viewitem&item=1973
BC

 

[steelandcanvas]

Thanks Medlog for your photo and text. I've been looking for something like this to help me plan my Commo Equipment on my Deuce.

 

[Boatcarpenter]

John, get a copy of TM 11-5820-401-10-2. Invaluable, describes all the parts and what they do, how to hook it all together, etc.
Can't go wrong with spending a few bucks on one.
BC
Check this link also. Brooke Clarke has done all the homework.
http://www.prc68.com/I/VIC.shtml

 

[sermis]

Here is how I have mine right now. I was going to mount behind the seats but I am going to install the reinforcement plate and not sure on room. I also thought about mounting to the hard top but most likely will remove the top in summer.
There is a guy on e-bay selling the helmets. If you have kids they will think it is cool. I got the small for my son. It is complete except for the “Y” cable.

 

[steelandcanvas]

Sweeeeet! Lots of ideas and info to search through, thanks Guys! Now I'll go from ignorant to at least having an idea as to what I want to do.

 

[gunner01]

OK OK OK where can gunner get a complete VIC 1 setup. I need one for my deuce......

 

[steelandcanvas]

OK OK OK where can gunner get a complete VIC 1 setup. I need one for my deuce......

Try the link BC suggested.

 

[sermis]

I gave all my parts to Steve Haney and he took all of the parts and made me a working system.

 

[steelandcanvas]

This is the guy that I got my system from. He took all of my parts and made me a working system.Steve Haney

This gentleman comes highly recommended from other Members on this site.

 

[Boatcarpenter]

Maybe not the least expensive all the time, but what you get will be in good working order.
BC

 

[Cdub]

Does it make a difference on which side of the Control Box C-2298 that the 4723 cable connects to...??

Thanks,

C'dub

 

[Boatcarpenter]

Control box hookup

Here you go C'dub.
BC

 

[Cdub]

RE: Control box hookup

Thanks BC........Can I go from Control Box to Control box as well with a small little 4723 jumper......??

I'm also having other issues........I'll shoot ya a PM.

Cheers,

C'dub

 

[cranetruck]

Note that one connector cable is slightly longer than the other, connect it to the receptacle marked with a YELLOW marker.

 

[hndrsonj]

All right I am slightly confused. I got it from the AM-1780 out. What do you do if you want the MX7777 surge suppressor without the MT1029 radio mount? Is it the CX-4720 from the battery to MX-7777 surge suppressor to a CX-13089 cable that attaches to the AM-1780?

 

[CARNAC]

All right I am slightly confused. I got it from the AM-1780 out. What do you do if you want the MX7777 surge suppressor without the MT1029 radio mount? Is it the CX-4720 from the battery to MX-7777 surge suppressor to a CX-13089 cable that attaches to the AM-1780?

Yep, the 13089 cable goes to the 1780 (bottom right if I remember correctly.

I would also highly suggest getting the manual downloaded. There's other settings and plug ins you should know about.

 

[hndrsonj]

Thanks for the info. I finally found a source for the missing parts and wanted to order them ASAP. Problem being I am 2,000 miles from my truck or manuals. I thought I was right just wanted to confirm. Thanks CARNAC!