I bought a new (to me) Deuce but the temperature gauge didn't work. I recently replaced both temperature sensor and gauge and it seems to operate around 140 degrees which seems very low.
The instructions suggest I should not drive until the needle moves from the starting position of 120 degrees - this seems to take 15-20 mins of idle. It then seems to run at about 140 degrees which is less than 1/8th in from the start of the gauge. The book however, suggests the engine runs at 200 degrees (which is center of the gauge).
Granted the book seems to be for earlier Deuces's - mine is 1984 is that makes a difference.
The guys at Saturn Surplus says the engines run colder than you think, but to check in this forum
Is the above correct ?
The instructions suggest I should not drive until the needle moves from the starting position of 120 degrees - this seems to take 15-20 mins of idle. It then seems to run at about 140 degrees which is less than 1/8th in from the start of the gauge. The book however, suggests the engine runs at 200 degrees (which is center of the gauge).
Granted the book seems to be for earlier Deuces's - mine is 1984 is that makes a difference.
The guys at Saturn Surplus says the engines run colder than you think, but to check in this forum
Is the above correct ?