Wheel Bearring Grease

[Loose Deuce]

Ok, I pulled my right rear wheels to change out a break wheel cylinder, which turned out to be ok. :shakehead: Didnt have that much grease on the bearrings, and the grease looks like regular multi purpose grease unless I'm wrong. Would it be better to use a good quality wheel bearring grease, the high heat type like you use on automobiles?

 

[Recovry4x4]

[3][green]I use GAA because it's cheap. A better quality grease can't do anything but good but there are tons of folks still using surplus GAA.[/green][/3]

 

[MVtrucker]

I use high temp Blue in tubes. The local National Guard uses plain old chassis grease (yellowish).

 

[sprucemt]

Grease can be had at www.sprucemtsurplus.com. GAA, GGP, WTR, etc.