Where can I find the DH relay?

[tom lovinggood]

Hello-I am looking for a "dog head" relay. Does it have another name? Can someone suggest a location or part number where I might find one? Thanks in advance

Tom Lovinggood

 

[Evil Dr. Porkchop]

https://www.steelsoldiers.com/showthread.php?60960-doghead-starter-relay-modifcation

 

[porkysplace]

Hello-I am looking for a "dog head" relay. Does it have another name? Can someone suggest a location or part number where I might find one? Thanks in advance

Tom Lovinggood

When you have a question anything on a CUCV this is the thread to start in , it has almost every thing broke down.
[h=1]CUCV Helpful Threads[/h]

 

[Tinstar]

Any auto parts store will have it.

 

[cucvrus]

Standard Motor Products SS591.

https://www.amazon.com/Standard-Motor-Products-SS591-Solenoid/dp/B000C81TFA

 

[doghead]

Standard Motor Products SS591.

https://www.amazon.com/Standard-Motor-Products-SS591-Solenoid/dp/B000C81TFA

That is not it, if the picture is correct.

 

[doghead]

NAPA, just like is shown in the helpful threads link.

https://www.napaonline.com/p/SME7018601

 

[doghead]

Still having trouble finding it, google any of these numbers with the word relay.

35510, 1752137, 202655, PRO MAS, 1445071, 184251, 740207, 1700751, 1-8640, 47-1910, 28-4210, 92-9845

 

[cucvrus]

They all do the same thing. Even a snow plow relay would work. As long as they pull the relay up and connect the 2 big studs they are good. Unless I am missing something. Could be.

 

[doghead]

Yes, you are missing the persons original question.

It was, where can he find the doghead relay.

We all know what that is referring to.

The one you posted is NOT what he was asking for.

He did not ask for any old relay that may work. (Is the one you posted isolated ground?). Have you used it for this purpose? Is the coil resistance close to the original so the controller works correctly?

Quite simply, your reply was not helpful to the OP.

 

[dougco1]

They all do the same thing. Even a snow plow relay would work. As long as they pull the relay up and connect the 2 big studs they are good. Unless I am missing something. Could be.

Rick, I think their talking about the relay under the dash. Don't forget to play nice or you will be in the doghouse again.