• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

which starter relay do i need

jbird3898

New member
14
0
0
Location
jefferson hills, PA
my m35a2 is not always wanting to crank over after i shut it off. i was told it could be the starter relay but i understand that there are 2 on there. i think on the block and on the actual starter. just want to find out which one to order or how to test to see what one it is.
thanks
 

dburt

Member
329
4
18
Location
NE Oregon & SW Idaho
There is one starter relay fastened to the block above the starter. The starter solenoid is on the top of the starter. Check your starter relay first. Make sure the cables from the battery and to the starter are tight. Make sure the small wire coming from the starter button to the top of the relay that energizes the relay is not worn or frayed and is fastened tightly to the relay.
 
Top