• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

wipers working on high only and dont return

84cucv1ton

Active member
1,822
0
36
Location
New Jersey
Cleaned the connections and the grounds. still doing it. that was all it took on my 109.. any ideas? hope i didnt fry something thanks
 

cpf240

Active member
1,479
5
38
Location
Free in Northern Idaho
You could use the later-year wiper motor that doesn't have the built in washer pump, that may allow it to run better. You'll need to add a pump for the washer then, either an in-line or get a later washer tank with pump built in.
 

Iceman3005

Active member
933
97
28
Location
Holt, MI
The stock one should be fine, when I replaced mine the wipers worked a lot faster on low and super fast on high. Remember your wiper motor is probably the original motor, so it lasted 20 plus years. I would say it is a pretty strong motor to have lasted that long!
 

Gunzy

Well-known member
1,769
66
48
Location
Roy, Utah
If those are 12 volt you should be able to get an A1/Cardone rebuilt one at an O'Reilly parts store.
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
I can't speak intellegently for wiper motors but for power window motor, I won't go anywhere but NAPA. Much faster.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks