wrecker seals

[redass73]

hey all, need some seals for the hyd motors on my 816. thought memphis would have them. wanted to seewhat all you gurus had to say. thanks
rick

 

[rizzo]

I need one for the hydro spin motor where the manual square nut comes out.

let me know what you find out

 

[gimpyrobb]

Wouldn't any hydraulic shop be able to fix them?

 

[acetomatoco]

Just take em to your local hydraulics guy as they are all std stuff on the M543A2 and M816.... some of the early Austin Western parts are harder to get.

 

[redass73]

thats the one i need too rizzo

 

[devilman96]

If anyone has an actual ID tag on their unit that you can pull number from I can prolly hunt them down... NSN / PN would be helpful also...

 

[redass73]

will the spin motor be tagged its self. or do you need the tag from the wrecker bed

 

[timntrucks]

ill take note of this tread as i might one day a leak myself Tim

 

[devilman96]

will the spin motor be tagged its self. or do you need the tag from the wrecker bed

It HAS TO BE the tag on the motor... Motor seals come as kits (usually) and the only way of chasing them is with these tags, anything else on the motor is 90% of the time a casting number which could fit several diffrent motors of diffrent flavors... Every now and again you get lucky on some of the older stuff and the spec numbers are hand stamped into the casting but its rare...

 

[rizzo]

it looks like the rotator motor and crane winch motor are the same

 

[redass73]

they do look the same rizzo but neither one have a tag on them.

 

[rizzo]

i will check mine and see

 

[Gamagoat1]

Here is the poop on my hyd. motors on the M816.
The winch motor:
Garwood 6385 (black tag)
P2048341
10876150
4-71
S-7488

The crane rotor:
Garwood 232 (red tag)
P204834D
10876151
3-71
S-8388