sewerzuk
Member
- 524
- 10
- 18
- Location
- Seaside, OR
I have posted a few videos in their own threads of a few MEP's that I have tested, modified, etc. I figure that they may be helpful for those that are working on their own MEP's, or for those that have questions about their capabilities, etc. So, I decided to post all of my videos in one place. Although I have repaired/tested dozens of them, I only have a few videos right now. But, I will continue to take and upload videos, and post them to this thread as time goes on.
MEP-006a:
Load test, startup, and a few clips of my load bank:
[media]http://www.youtube.com/watch?v=MJ0SEAEgPo0[/media]
Load and overload test, waveform display, and single phase starting surges:
[media]http://www.youtube.com/watch?v=ptqzoolC38Q[/media]
MEP-004a:
Startup, operation, and 3 phase load test:
[media]http://www.youtube.com/watch?v=EsHsW1x_PLQ[/media]
Startup, operation, load test, single phase surges, and waveform analysis:
[media]http://www.youtube.com/watch?v=I_ykrzMbTZk[/media]
Recovery, maintenance, and first startup:
[media]http://www.youtube.com/watch?v=INhecpiGAoc[/media]
Recovery, maintenance, and first startup part 2:
[media]http://www.youtube.com/watch?v=gGyQj2RqhCQ[/media]
Repair, maintenance, and first startup of another set (this one is interesting because I get zapped at one point, and I also capture a piece of copper wire being vaporized as well):
[media]http://www.youtube.com/watch?v=AABL7m7z3R0[/media]
MEP-003a:
Demonstration of an -003a in a trailer with PLC controls:
[media]http://www.youtube.com/watch?v=52dkk7QrmUA[/media]
Some cold start videos:
[media]http://www.youtube.com/watch?v=uN5ar2S_IVc[/media]
[media]http://www.youtube.com/watch?v=R9HhFrEHJOc[/media]
[media]http://www.youtube.com/watch?v=K0dwvFvrSpg[/media]
MEP-006a:
Load test, startup, and a few clips of my load bank:
[media]http://www.youtube.com/watch?v=MJ0SEAEgPo0[/media]
Load and overload test, waveform display, and single phase starting surges:
[media]http://www.youtube.com/watch?v=ptqzoolC38Q[/media]
MEP-004a:
Startup, operation, and 3 phase load test:
[media]http://www.youtube.com/watch?v=EsHsW1x_PLQ[/media]
Startup, operation, load test, single phase surges, and waveform analysis:
[media]http://www.youtube.com/watch?v=I_ykrzMbTZk[/media]
Recovery, maintenance, and first startup:
[media]http://www.youtube.com/watch?v=INhecpiGAoc[/media]
Recovery, maintenance, and first startup part 2:
[media]http://www.youtube.com/watch?v=gGyQj2RqhCQ[/media]
Repair, maintenance, and first startup of another set (this one is interesting because I get zapped at one point, and I also capture a piece of copper wire being vaporized as well):
[media]http://www.youtube.com/watch?v=AABL7m7z3R0[/media]
MEP-003a:
Demonstration of an -003a in a trailer with PLC controls:
[media]http://www.youtube.com/watch?v=52dkk7QrmUA[/media]
Some cold start videos:
[media]http://www.youtube.com/watch?v=uN5ar2S_IVc[/media]
[media]http://www.youtube.com/watch?v=R9HhFrEHJOc[/media]
[media]http://www.youtube.com/watch?v=K0dwvFvrSpg[/media]
Last edited: