defbob
New member
- 73
- 1
- 0
- Location
- Norwich, CT
[media]http://www.youtube.com/watch?v=C3BwTtn-ffo[/media]
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M715 Cummins First test drive!
- Thread starter defbob
- Start date
nk14zp
Active member
- 2,636
- 17
- 38
- Location
- Columbia Falls Maine
Nice !
defbob
New member
- 73
- 1
- 0
- Location
- Norwich, CT
valvebody is bad, tranny would only stay in 2nd gear.
Varyag
Member
- 927
- 3
- 16
- Location
- Garfield, Washington
Wasn't hard to see what house you were going to pull into.
spicergear
New member
- 2,307
- 27
- 0
- Location
- Millerstown, PA
BillF
New member
- 279
- 1
- 0
- Location
- Hillsboro, NH
Very nice. I would love an m715 with a cummins
defbob
New member
- 73
- 1
- 0
- Location
- Norwich, CT
spicergear
New member
- 2,307
- 27
- 0
- Location
- Millerstown, PA
Is that a summit racing radiator in there? I know there was a PN for one that was a pretty good fit. I had one cooling my 427TD BBC with a 35 or 40,000GVW size oil cooler as well. FYI, I also found out, surprisingly that the M715 engine compartments don't breathe very well so air flow through the radiator can become an issue with a full engine compartment. I put a rear facing vent on the hood that worked great!!! Was worth 10-15* engine temp for me. Granted the BBC is a lot more engine bay filling than the inline Cummins, but just something to keep in mind. Oh, I also ran a high pitch mechanical fan so there would be less electrical stuff.
bcowanwheels
Member
- 490
- 2
- 18
- Location
- KINGSPORT, TN.
the only drawback to a 4bt or 6bt is there very noisey. even with dynomat on floors and firewall. looks like you did a fine job pal.
bob
bob
defbob
New member
- 73
- 1
- 0
- Location
- Norwich, CT
It is a Summit Radiator. But not a bolt in deal. I had to widen the radiator opening and weld on some brackets. My radiator is part #SUM-380328 Summit Racing SUM-380328 - Summit Racing Street & Strip® Aluminum Race Radiators - Overview - SummitRacing.com
defbob
New member
- 73
- 1
- 0
- Location
- Norwich, CT
I used a remote tranny cooler with its own fan mounted where the spare tire goes and have -8 braided line feeding it.
spicergear
New member
- 2,307
- 27
- 0
- Location
- Millerstown, PA
Yep, that's the same radiator and same widening of the mount that I did. I'm guessing by the color that was an industrial Cummins or did you just 'industrialize' it via rattlecan? 
defbob
New member
- 73
- 1
- 0
- Location
- Norwich, CT
I am use to the sound of a diesel. I have 4 Cummins 6BT's, 2 Cummins 4BT's, 1 Isuzu 4BD1T, and an LD-465 Multifuel. My Challengers and Cutlass are louder than my diesels.
defbob
New member
- 73
- 1
- 0
- Location
- Norwich, CT
I painted it the color is was meant to be
. The motor is out of an '89 Dodge W250
. The motor is out of an '89 Dodge W250wrecker
New member
- 13
- 1
- 3
- Location
- Fort Smith, Ar
Looking good, sounding good. Too bad about the valve body, what transmission are you using?
spicergear
New member
- 2,307
- 27
- 0
- Location
- Millerstown, PA
Nice cubic inches on the toy list in your signature, btw!
defbob
New member
- 73
- 1
- 0
- Location
- Norwich, CT
Last edited:
defbob
New member
- 73
- 1
- 0
- Location
- Norwich, CT
Chrysler 727 with mated NP205
- 5,264
- 4,005
- 113
- Location
- Charleston, WV
Nice work on the swap! Nothing better than the first test drive.
I'm running the stock AMG TH400 (3L80) behind my 6BT, but have a guy in town that's going to build me a beastly 47RH. I'm going to stick an Atlas box behind it.
Nothing better than the first test drive. I'm running the stock AMG TH400 (3L80) behind my 6BT, but have a guy in town that's going to build me a beastly 47RH. I'm going to stick an Atlas box behind it.
spicergear
New member
- 2,307
- 27
- 0
- Location
- Millerstown, PA
Looks like you're a fan of World Products blocks! Very, very nice!
http://i870.photobucket.com/albums/ab262/defbob/Hemi/5-21-09-06.jpg
http://i870.photobucket.com/albums/ab262/defbob/Hemi/5-21-09-06.jpg