Wisconsin to Ohio and back

[T. Highway]

I will be traveling from the Milwaukee area to the Wright - Patterson AFB area and back on May 12th.

I will have an empty 1 ton pickup truck on the way down and some room on the way back. I will be traveling on HWY 65 and 70.

Bert

 

[Recovry4x4]

Thanks for putting this out there.

When you can, please update your location with a minimum your state.
One of those pesky rules.

• Location: We require that all members include their state in their new member profile. This allows the other members to know their neighbors. Users who refuse to add their location will be subject to warning, temporary ban, and then permanent ban.

 

[T. Highway]

I've corrected the infraction, no beatings required here.

 

[Recovry4x4]

Thanks

 

[gimpyrobb]

What cha getting? Thats not too far from me. You should stop at Mendelsons while you are in the neighborhood.

 

[T. Highway]

Picking up M37 winch/PTO/parts and brackets mounts and hardware.

What is Mendelsons?

 

[trukhead]

I will be traveling from the Milwaukee area to the Wright - Patterson AFB area and back on May 12th.

I will have an empty 1 ton pickup truck on the way down and some room on the way back. I will be traveling on HWY 65 and 70.

Bert

I need an M35A3 wheel-tire assembly brought back to Wisconsin but it is located 400 miles east of WPAFB in Pennsylvania

 

[gimpyrobb]

Its a liquidation place on 1st street in down town Dayton. Between their 1st and 3rd floor, you could spend a day there and not see it all. I go there for machining bits and 1$ per pound hardware, but they have all kinds of stuff.

 

[skinnedknuckles]

Don't forget the Air Force Museum and the Wright Brothers exhibit areas if you into aircraft
Paul in Janesville, Wis

 

[Stretch44875]

Its a liquidation place on 1st street in down town Dayton. Between their 1st and 3rd floor, you could spend a day there and not see it all. I go there for machining bits and 1$ per pound hardware, but they have all kinds of stuff.

Ya know, just because the wife is usually with me when I see you, doesn't mean we can't drag her through a place like that.

 

[swbradley1]

Paul is correct, take the time and go to the museum. The museum is a left turn at the light outside the GL gate and down on the left less than two miles. It's also on the way to get back to any of the major highways anyway so you really have no excuse.

If you need help I live basically on the same street as the museum to the west.

 

[T. Highway]

I need an M35A3 wheel-tire assembly brought back to Wisconsin but it is located 400 miles east of WPAFB in Pennsylvania

trukhead,
This is not on my route, but if you could get it to Dayton, we might be able to work something out.

I've been to the Air Force Museum a couple of times already and really enjoyed it.

swbradley1,
Shoot me a PM with your number just in case Murphy shows up.

So far I have M1008 parts (Bumpers, cargo cover and parts) headed from Waukegan IL. to Richmond IN. with one quick stop at the Lebanon IN. exit 140.