It is a constant 10 mph over and it came directly from government liquidation so I don't know who would have changed the gear. Any ideas why the fuel gauge is stuck at 1/2 ? Thank you
Really need to check the TM -20 manual. Do the testing as per the TM.
It should help pin point the problem.
Mine just started showing half full after I cleaned up the instrument cluster. But first I think you should check the ground under the dash by the E-Brake then the ground on the Frame for sending unit. , clean the fuel gauge terminals, Make sure the main plug into the instument cluster is clean and Tight.
Speedo- On the M-1009 theres supposed to be a adapter that the Speedo cable goes to on the transfer case. Theres no adapter on the M-1008. If the adapter is removed on yours that may be the promlem. SO many differnt options. Cable, gauge, adapter, Speedo gears. I just changed my speedo cause it was jumping and now it works great.
I tried to clean it but desroyed it.
Do some testing and searching then report back.
