GreenBull
New member
- 81
- 0
- 0
- Location
- SE Michigan
TECHNICAL MANUAL, TM 9-2815-257-24
REPAIR PARTS AND SPECIAL TOOLS MANUAL, TM 9-2815-257-24P
That is all.
That is all.
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Your welcome. Still looking for the modification instructions and any other documentation for the modification kit NSN 2815 01 440 4426. It was supplied by VSE corporation.
I think it must be quite different. The 016d kit has 53 parts and the 016e kit only has 20.I have mod instructions for the MEP-016E, Onan to Yanmar L100 conversion. The kits were made by Martin Diesel.
I found a solution. A 1 inch copper pipe elbow will fit snugly over the muffler exhaust port. I didn't even need to put a screw in it to keep it on.Okay, I have looked in the TM's and Yanmar oper. manuals and can not find anything on the exhaust for the MEP016D. There has got to be something that goes on the output of the muffler to keep the exhaust from blowing against the genset control box. Anyone have any info on this, or do they all exhaust straight out of the muffler.
I have a copy of the MWO for the MEP-016d conversion done by Martin Diesel. It covers the Yanmar, P/N's 96-13014, L70 AE-DE, L70AE-DEMB, L70AE-DEVSE3.Still looking for the modification instructions and any other documentation for the modification kit NSN 2815 01 440 4426. It was supplied by VSE corporation.
Ike,Thanks for the video Derf, do you know if there are any operating instructions for the MEP-016D online? Just the basic stuff, how to start, stop, how does the fuel transfer with the belly tank work, that sort of thing.
thanks
Ike
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!