Windshield dimensions??

[tah081]

does anyone know the exact dimensions of the driver windshield glass so i can have one cut?!

thanks Kyle

 

[eagle4g63]

http://www.steelsoldiers.com/early-deuce/80294-how-rust-proof-reseal-window-frames.html

There you go read this, he gives the dimensions of new glass!

 

[tah081]

thank you!
mine is shattered and dont want to take the passenger side out just measure it...

 

[joshs1ofakindxj]

WRONG WRONG WRONG!!!!

The link above will give you glass dimensions for an older deuce M135/M211.

They are not the same as the M35!!!

Now I have two pieces of new windshield glass for an older deuce that do me NO good.

#%*^$%*^#%(#@*&^&#*^@(#^@$)@)#^@*!

Does anyone know M35 windshield dimensions?

I'm measuring 26-7/8" by 16-5/8" from the frame and that is leaving some wiggle room for rubber.

 

[steelandcanvas]

Does anyone know M35 windshield dimensions? I'm measuring 26-7/8" by 16-5/8" from the frame and that is leaving some wiggle room for rubber.

Josh, I have a brand new windshield glass in the box, when I get home this afternoon I'll measure it for you.

 

[jerseyjeep2003]

26 7/8 x 16 5/8 is correct, just go a little to the minus side on the 16 5/8 ( maybe 1/32 smaller), I had my new glass cut to those dimensions and it was real tight getting the top bar on. I had to use new frames, as I found the only thing holding the old ones together was the 12 coats of paint.

 

[gringeltaube]

Dimensions for M35 inner WS frame and glass, posted here.....


G.







Edit: That thread I linked to, has been deleted.

See all inner WS-Frame & glass dimensions, below....

 

[joshs1ofakindxj]

thanks everyone! I should be able to get one before Wednesday!

 

[EWhytsell]

26 7/8 x 16 5/8 is correct, just go a little to the minus side on the 16 5/8 ( maybe 1/32 smaller), I had my new glass cut to those dimensions and it was real tight getting the top bar on. I had to use new frames, as I found the only thing holding the old ones together was the 12 coats of paint.

^this very easy replacement, but I was able to get all the bolts/screws removed without issue.

 

[willy]

They are for sale at Ebay
I found it cost as much for just the glass as it cost to buy new in box
with all new metal and rubber
He has 16000 off them
Willy

 

[gringeltaube]

Inner WS assy, ebay?

So far I haven't seen them for less than $149 + shp, ea. ???

G.

They are for sale at Ebay
I found it cost as much for just the glass as it cost to buy new in box
with all new metal and rubber
He has 16000 off them
Willy

 

[joshs1ofakindxj]

I got a piece of glass cut today locally to the 26-7/8 x 16-5/8 and it cost $28. Worked perfect. I sand blasted and painted my old frames and used a $11 caulking tube of oderless black silicone to seal it up. It was messy but it works!

 

[goatijoe]

How thick is the glass yall used? I need two glasses and thought of getting something other than glass in them.

 

[gringeltaube]

1/4 inch.

G.

 

[Warthog]

Are you guys buying regular glass or DOT approved safety glass?

 

[Flyingvan911]

I got DOT safety glass from my local Safelite for $25 a piece. It has a slight blue tint. They were out of the clear flat glass. They liked that I was putting it in a deuce. I had to put a bunch of POR 15 on my frames. They were badly rusted too.