ETN550
New member
- 457
- 9
- 0
- Location
- Knoxville, TN
I have converted around 10 or so units from the 24 volt 4HN battery to a pair of Lawn and Garden 12 volt U1-1 batteries. I do this to add value and make it easier to get batteries and easier to keep them charged or jump them with a 12 volt vehicle.
Despite having dimensions to cut all of the materials the fitment is very close so they must be welded up precisely.
So far, I have not offered them up to members for sale because each must be fitted.
Well now I have a bunch of units to do that I will be getting soon. So I have decided to make a fixture to hold them for the welding.
I'm curious if anyone here is interested in buying the tray I make and the top clamp for around $60.00. I can supply a cross over cable or you can make your own. You buy 2 batteries on your own. They are available everywhere for about $40.00 each without a core turn in. I bought 10 batteries last spring for $21.00 each at Advance Auto. They ran a sale for 2 months. I don't have any left now.
The new battery tray bolts right in the 016B and 016E with 2 holes needed to be drilled in the aluminum frame. The 701A requires a simple modifcation to the acoustic cover.
Just reply here or PM me. I'm making the fixture either way. Should have made it 10 units ago...
Despite having dimensions to cut all of the materials the fitment is very close so they must be welded up precisely.
So far, I have not offered them up to members for sale because each must be fitted.
Well now I have a bunch of units to do that I will be getting soon. So I have decided to make a fixture to hold them for the welding.
I'm curious if anyone here is interested in buying the tray I make and the top clamp for around $60.00. I can supply a cross over cable or you can make your own. You buy 2 batteries on your own. They are available everywhere for about $40.00 each without a core turn in. I bought 10 batteries last spring for $21.00 each at Advance Auto. They ran a sale for 2 months. I don't have any left now.
The new battery tray bolts right in the 016B and 016E with 2 holes needed to be drilled in the aluminum frame. The 701A requires a simple modifcation to the acoustic cover.
Just reply here or PM me. I'm making the fixture either way. Should have made it 10 units ago...
Last edited: