BleedDemon
Member
- 109
- 2
- 18
- Location
- Lake Charles, LA
Only if it had tracks, was amphibious and VTOL.I'm not sure this could get any cooler.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Allison M916 + Mk48 Cab = 6x6 "FEMTT"
- Thread starter M920
- Start date
- 3,150
- 1,696
- 113
- Location
- Pemberton, N.J.
I could see him putting tracks on it but knowing how much Soni loves his steel plate I don't think you will ever see amphibious or VTOL.
Thanks for the nice compliments! I will have to implement some kind of headlight protection as you mentioned. I would like to have it removable though, that way I can change bulbs without having to remove the whole top of the bumper....
350TacoZilla
Member
- 263
- 0
- 16
- Location
- Hancock MD
as everyone else has said excellent work! I would never look at that and think it started life as a standard style truck instead of cab forward. For the light protection how about plate steel surround that bolts to your armor then a expanded steel insert, as long as mesh was fairly large open it shouldnt cause any problems with light. I'm actually using expanded metal for a homemade grill and headlight guards on my samurai. (threw together a pic for basic idea)
Nice! Even with a picture of the design....that is pretty much what I had in mind....and thanks for the drawing!
So I worked until 22:30 hours the night before last on finishing the main supports for the top cross bar on the front bumper. Then we got hit by another snow storm and so there was some digging and sweeping yesterday and today.
But every time we had it cleared off and started working on the truck.....HERE COMES ANOTHER SNOWSQUALL!!!!
Attachments
Augdog1964
Member
- 522
- 15
- 18
- Location
- Richmond, IN
Awesome Job!
Ok when you're done, I'll need you to build one for me on a HET chassis! (I'm only 1/2 joking!) I'd LOVE to have one like this too!
Ok when you're done, I'll need you to build one for me on a HET chassis! (I'm only 1/2 joking!) I'd LOVE to have one like this too!
350TacoZilla
Member
- 263
- 0
- 16
- Location
- Hancock MD
Its sad that NM is getting more snow than MD this year, keep up the good work.
- 14,640
- 4,820
- 113
- Location
- Buchanan, GA
How much for a 931 based "SEMTT"? LOL
If you can supply the M931 and the Mk48 cab, we can certainly talk..... I would really like to do that combo, I think it would make a great truck!
OldSchoolAmerica
Member
- 76
- 0
- 6
- Location
- Western New York
Amazing build... Great creativity back by top notch engineering and fabrication skills. opcorn:
opcorn:
- 14,640
- 4,820
- 113
- Location
- Buchanan, GA
No fair Soni, you've got me looking for donors now...If you can supply the M931 and the Mk48 cab, we can certainly talk..... I would really like to do that combo, I think it would make a great truck!
FireFighterHill
Banned
- 1,540
- 62
- 0
- Location
- Riyadh, Saudi Arabia
Ive already got a 931, I would just need a cab!
There are brand new replacment Mk48 cabs around for sale! The owners are asking anywhere from $2500-$4500 for them....Just do a Google search!
FireFighterHill
Banned
- 1,540
- 62
- 0
- Location
- Riyadh, Saudi Arabia
Alittle to rich for my blood right now. Gotta get the M931 running soon. Just bought a running take out engine for it and 2 air ride seats.
Steering
Got a break in the weather and was able to finish the steering setup. I'm very happy because when I turned the steering wheel to the right....
THE WHEELS ACTUALLY TURNED TO THE RIGHT!!!!!
When designing this setup, I made sure that none of the components can come undone in use. One of the little tricks that I do on steering yokes, is to put a small welding "dot" on the inboard end of the keys, so that they can not work their way out of the yokes, or interfere with the u-joint! (see photo)
Also, the shafts are built so they are trapped between their respective components, so unless the parallel shaft gearbox or the steering box itself are unbolted, the stub shafts can not slip of their gear shafts!
This out of the way, I started on the front hood support / fender mount. This is the only thing left to fabricate, before I can take the cab back off, do the remaining welding on the inside of the protective tub, primer & paint and bolt down the cab for the final time!
Very exciting stuff....!!!!
Got a break in the weather and was able to finish the steering setup. I'm very happy because when I turned the steering wheel to the right....
THE WHEELS ACTUALLY TURNED TO THE RIGHT!!!!!
When designing this setup, I made sure that none of the components can come undone in use. One of the little tricks that I do on steering yokes, is to put a small welding "dot" on the inboard end of the keys, so that they can not work their way out of the yokes, or interfere with the u-joint! (see photo)
Also, the shafts are built so they are trapped between their respective components, so unless the parallel shaft gearbox or the steering box itself are unbolted, the stub shafts can not slip of their gear shafts!
This out of the way, I started on the front hood support / fender mount. This is the only thing left to fabricate, before I can take the cab back off, do the remaining welding on the inside of the protective tub, primer & paint and bolt down the cab for the final time!
Very exciting stuff....!!!!
Attachments
Hoefler
Active member
- 1,096
- 20
- 38
- Location
- White Bear Lake,MN
Nice looking welds-good job.
Pete
Pete
- 14,640
- 4,820
- 113
- Location
- Buchanan, GA
Well I know where there's a 939 series rolling chassis. It doesn't have an engine/trans though. I also see a few possibilities coming up for auction that might be a better candidate (actual 931's A2's exactly). Where did you come up with your cab? Would only the PLS cab work or would a HEMTT work as well? (I know they're different, but I'm wondering about the steering and cab tunnel)Yes fair, I'm serious! So just keep looking.....it will be a few more weeks before the FEMTT is done....