• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Chopping the Top Lower. Windshield Chop Modification

sunshinelock

New member
9
0
0
Location
Tampa, FL
I just did a quick search and didn't see any posts that relate to this other than this old thread: http://www.steelsoldiers.com/showthread.php?34925-bobbed-deuce

I have a Deuce that I'll be parking in a county that restricts parking to 8 feet wide, 8 feet tall, and 21 feet long. The height of this vehicle worries me since it's on 46 inch tires. I haven't had the truck long enough to measure the height (it's at a mechanic to replace axle seals) but I'm certain this is going to be over my 8 foot height.

I think I can totally fit within parking codes if I cut the pipe lower (or even redirect it) and chop the windshield down (it's a soft top).

Where do I get this done? Has anybody else done this?
 

armytruck63

Active member
1,663
10
38
Location
Redlands, CA
Just an FYI: When I had my deuce, it was hard to see stoplights at intersections without leaning forward and looking up, and I'm only 5'10". This will only get worse if you chop down the windshield.
 

sunshinelock

New member
9
0
0
Location
Tampa, FL
I'd like a solution that minimizes time involved parking at night and taking off in the morning. Taking down a top at night, especially if it's raining and thundering (which happens a lot down here in summer) isn't going to cut it.
 

porkysplace

Well-known member
Steel Soldiers Supporter
9,604
1,493
113
Location
mid- michigan
I'd like a solution that minimizes time involved parking at night and taking off in the morning. Taking down a top at night, especially if it's raining and thundering (which happens a lot down here in summer) isn't going to cut it.
That solution would be put stock tires on.
 

bigginstactical

New member
246
1
0
Location
port angeles washington
Agreed^^^ if this is how bad it already is there you may be having some more issues down the road with a big nasty deuce sitting in your driveway. May want to consider parking at a friends or something.
 

Jeepsinker

Well-known member
5,399
456
83
Location
Dry Creek, Louisiana
I'd say move too. Or get on the county commission and try to change these ridiculous ordnances that make no sense.
And why would anyone want to live somewhere that you can't even park YOUR vehicle in your driveway without somebody being up your a** about how tall it is? Moreover, why do these morons think they can subject people to ridiculousness like that? People need to get off the power trips. Rant over. Thank you.
 
Last edited:

w3azel

Member
229
0
16
Location
Waipahu/HI
Yes it can be done, your best bet is looking for a shop with a lot of chrome and colorful cars out front and big rims. They should have some metal workers who can do a chop top no problem. A hot rod shop would be best but those are getting pretty rare these days. If you have a welder and a cutting disk you can do it yourself.
 

gunboy1656

Active member
3,587
22
38
Location
Beaver Falls, PA
One question I have is your truck bobbed? If not your over the length as well.

Even if you chop the windshield, do everything to make it fit their size limitations, they are still going to find something.
 

Bob H

Well-known member
3,142
161
63
Location
Huron National Forest, Michigan USA
The windshield frame as well as the soft top frame are pretty simplistic in design.
Take it apart, cut it down and get glass made to fit.

before I did that, I'd put some thought into modifying the stock top & windshield to fold down quickly and easily.
(not unlike a convertible top on a car) Same could be done with the stack.
Get that figured out and you could probably sell quite a few "kits"
 

Tinwoodsman

Well-known member
Steel Soldiers Supporter
3,923
76
48
Location
Comfort, Texas
Dig two trenches on the side of your house and park it in the those. Should give you a foot reduction. Or construct a berm and adopt a defilade position for maximum concealment. :-D
 

FormerNewMVGuy

Active member
1,237
10
38
Location
stockton NJ
Caveman trucks did a chopped top Bobber a few years back, if I look hard I may have a pic somewhere.

Edit...... just clicked the link.....
 
Last edited:

sunshinelock

New member
9
0
0
Location
Tampa, FL
I Googled "windshield chopping" and found a lot of information on how to chop it. It actually looks simple enough for me to do myself. I'll probably end up chopping my own and having the canvas top modified to fit.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
It is less than 8' wide.

I'd park it on it's side!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks