borris
New member
- 5
- 0
- 1
- Location
- Perryopolis, PA
Dear members:
Can anyone tell me what CTIS wheel hoses will fit our BAE Caiman?
Thanks,
Steve
Can anyone tell me what CTIS wheel hoses will fit our BAE Caiman?
Thanks,
Steve
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CTIS Wheel hoses for BAE Caiman
- Thread starter borris
- Start date
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
Do you have independent suspension or solid axles?
borris
New member
- 5
- 0
- 1
- Location
- Perryopolis, PA
We have a new vehicle with independent suspension.
borris
New member
- 5
- 0
- 1
- Location
- Perryopolis, PA
Here is a picture of our vehicle.
- 1,093
- 146
- 63
- Location
- Los Angeles,Ca
That is nice. Looks like another camper project in the works.
borris
New member
- 5
- 0
- 1
- Location
- Perryopolis, PA
We are law enforcent. Only camping allowed is outside bad guys house.
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
Now your going to see that the "free truck" isn't exactly free... All the special parts that break are going to drive you mad!
borris
New member
- 5
- 0
- 1
- Location
- Perryopolis, PA
You are correct. They are all expensive to operate. At least this one has a Cat engine and Allison tranny. We have been fairly successful in finding a few things we need on Ebay.
- 6,861
- 696
- 113
- Location
- Stratford/Connecticut
If you have an old hose you should be able to get a local hose shop to make them up pretty cheap.
ke5eua
Well-known member
- 2,568
- 41
- 48
- Location
- Baton Rouge (Central), LA
Or in it after you drive through the front door k-9 cop style.
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
Well we are not well versed on Caimans here. If you had the solid axle, that would be the same as FMTV trucks. If I were you I would call BAE aftermarket parts sales and see if they can help you. BAE is somewhat in transition, as they just closed the plant in Sealy TX that built the Caimans and laid off 350 people. If that is a dead end, contact the axle mfgr which is either Meritor or Axle Tech.
ke5eua
Well-known member
- 2,568
- 41
- 48
- Location
- Baton Rouge (Central), LA
Borris I don't have the contact info anymore but there is a place in Texas, ndt should know what I'm talking about. They were scrapping a bunch of caimans, I believe they were all solid axle but could have some independents in it. They might be able to get it if they didn't cut it or knew you were looking for it. Great crew down there.
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
That place is Premier Metal Buyers and all the Caiman chassis they were scrapping are solid axle.
ke5eua
Well-known member
- 2,568
- 41
- 48
- Location
- Baton Rouge (Central), LA
Ok, I thought so but I figured you knew a little more about it.