BFR Metals, Salina Kansas, a Goodie Hole

[KaiserM109]

Glen,
How about front springs from an M939 series, including all the fixin's?

Arlyn

PM sent

 

[Stein12501]

Glen,
Wanting to see if you had any more of those 14.00 x 20 AT2A with rims? Thanks,

 

[91W350]

Any fender extensions for a M116A3 3/4T trailer? (fingers crossed for luck)

We had hundreds of those trailers and no interest. We peeled the tires that were good and the rest went to the shredder. Not a one left on the place now. I always thought they would be perfect for a farmer/rancher to pull his ATV behind his pickup.

 

[91W350]

Glen,
How about front springs from an M939 series, including all the fixin's?

Arlyn

PM sent

We should have everything except the U-bolts.

 

[91W350]

Glen,
Wanting to see if you had any more of those 14.00 x 20 AT2A with rims? Thanks,

If that is the Goodyear 1400, we have plenty right now. We only have a few ZXLs, plenty of XLs.

 

[91W350]

Glen, do you happen to have any 9x16 super lugs off a M101?

None!

 

[91W350]

I need a couple of fuel caps for my M939 series tractor. They were liberated from my truck at a truck stop.

Those already went out with the brass load.

 

[mattgunguy]

Hi. I'm looking for a bench seat set for a deuce. Doesn't have to be mint or anything, just complete. Could be out of a 5 ton even I've got a welder, I'm willing to make something work.


Thank you
Matthew

 

[91W350]

We are out of deuce and five ton seats and have no complete trucks now. The market has been too high for us to buy anything. I do not mind as I would rather see them saved than recycled. We have a lot of parts that we pulled still on the grounds. Troop seats, winches, some 923 covers, good doors etc...

 

[Sneaker]

Do the 939 trucks you have parted out have any 24v air dryers for the air systems? Have you saved any? Curious, I want to use one on a deuce.

 

[liekos62]

Glenn,

It was a pleasure visiting with you again! Thanks for the good deals! See ya next time I roll through.
Sneaker the 24v Air dryers are available on Bbay for very reasonable prices new.....

Adam

 

[mlwats1@hotmail.com]

ntc250 price

what are you asking for a ntc250

 

[ah64pilot]

Any Hard tops for the 2.5 ton ? Thanks

 

[91W350]

Any Hard tops for the 2.5 ton ? Thanks

No hardtops, sorry to report....

 

[scorpion6]

Any soft top canvas for 2.5 ton?

 

[scorpion6]

Looking for a full wench and extensions, and canvas for my deuce. Also a cab heater. If you have it whats the cost.

 

[Another Ahab]

Cab Heater Option

Looking for a full wench and extensions, and canvas for my deuce. Also a cab heater. If you have it whats the cost.

Here's skinny on a ducted 24V electric heater (no wait for engine warm-up):

- Link is here

http://www.sportsimportsltd.com/usa-made-24-volt-ducted-electric-heater.html?utm_source=usa-made-24-volt-ducted-electric-heater&utm_medium=shopping%2Bengine&utm_campaign=googleproducts&gclid=CjwKEAiA5qOlBRDAn8K5qen65joSJADRvlbqLjEcl9wa5nk7rX779EvxKvtH9Bvo9jGWTlYCWrq_UhoCxKzw_wcB



​

View attachment 24 Volt Heater pp 1.pdf View attachment 24 Volt Heater pp 2.pdf

 

[91W350]

I may have a winch set up, no heaters or tops. I know I have at least one winch, need to check on PTO, shaft and shifter.

 

[91W350]

what are you asking for a ntc250

We were getting 700 dollars for a known runner with no leaks and good oil pressure. I did not save enough of them, sold out.

 

[jsrule62]

Do you have any 900 series spare tire holders in decent shape? Thanks, Jerry