Who has an M796A1 Bolster Trailer?

[SCSG-G4]

PM me, as I have a question or two. You can also post pictures so I know we are talking about the same thing.

 

[Warthog]

I have a manual for one. I bought three and can get pictures tomorrow.

 

[drgreg]

I have one of each. How can I be of help?

 

[quickfarms]

I have one, or what's left of one, It is a parts trailer for my M1061

 

[giaesolar]

I just purchased one and am waiting for it to be delivered to my shop.

 

[rosco]

I guess that a lot of us have them. Sometimes they are very handy.

 

[giaesolar]

View attachment 517128 I guess that a lot of us have them. Sometimes they are very handy.

I have an idea to turn it into a roll off trailer eventually or dump trailer. I picked up the trailer for $500 and picked up a mobile sanitary treatment plant for $400. The plant has a nice steel tub that I would like to mount on the trailer with a hydraulic kit. Probably going to sit higher than a normal one but it will be pretty nice and beefy. Have you ever seen anyone do anything like that? I would be interested in speaking with them. I searched the thread but found nothing with this model trailer.

 

[Trailboss]

They are handy for bulky loads.

SCSG-4 what's your question?

 

[giaesolar]

Just curious how they pull behind a standard F350 turbo-diesel and was interested to know if anyone had converted one to a dump trailer and their experience. My ultimate goal would be to make it into a roll off as the short distance from the axle to the rear of the frame looks to give a good pivot point to work with this application with little modification. I have to do a electric over hydraulic mod to it for the brakes and would be interested if you or anyone had a suggestion on what components worked well for them also. It is a relatively easy mod but one I have to make as I do not have a vehicle with air brakes to pull it with.

 

[giaesolar]

I have one of each. How can I be of help?

How does it pull for you behind your pickup? Did you do a conversion on the brakes?

 

[steve6x6x6]

I like the looks of this trailer, i was thinking about buying a M1061A1 and remove some weight and cut and weld in a section about 4' up front.