• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

STE/ICE-R manual???

TheBuggyman

New member
663
5
0
Location
Fredericksburg, Virginia
All,
Looked in the TM section and did not notice anything. First, did I just miss it and if not, second, does anyone have one in a PDF format or such for e-mail?
Thanks in advance for your help!
 

Gamagoat1

Active member
746
44
28
Location
Kiowa, Colorado
I just loaded the operator's manual and parts manual for the STE/ICE-R.
It's in the Tech. Man. section.
Operators Manual TM9-4910-571-12&P

Parts and Maint. TM9-4910-571-34&P

I guess it will be available when it's approved by SS.
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
Sorry guys, I can't approve those manuals. Neither is approved for public release and the site admins frown on putting up stuff not for public release. Sorry folks.
 

ONTOS66

Member
433
3
18
Location
Franklin, NJ
Our Friends (?) at LOGSA list 3 manuals in .pdf format in this series but none of them are approved for public distribution. You would require a current security clearance to proceed to the next area to download the manuals. I'm sure that this is just another example of "reclassifying" the manuals as a low priority task. The equipment is available surplus, as is a lot of other gear but the manuals are still held as not approved for public distribution, etc. BLAGH!!!!

TM 9-4910-571-34&P INCLUDING PARTS AND SPECIAL TOOLS LIST SIMPLIFIED TEST EQUIPMENT FOR INTE COMBUSTION ENGINES REPROGRAMMABLE (STE/ICE-R) (NSN 4910-01-222)

MWO 9-4910-571-35 SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTI ENGINE STE/ICE (NSN 4910-00-124-2554)

TM 9-4910-571-12&P OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL INCLUDING REPAIR AND SPECIAL TOOLS LIST FOR SIMPLIFIED TEST EQUIPMENT FOR INTERN COMBUSTION ENGINES (NSN 4910-01-124-2554)
 

Crazyguyla

Active member
817
124
43
Location
Altus, OK
One thing is to have the equipment, another thing is to know how to operate it. The STE-ICE is a very simple piece, althogh slightly confusing piece of equipment to use. If the STE-ICE still has the flip cards still attached, the startup and simple tests are listed. Most updated manuals will have STE-ICE procedures for that perticular vehicle. The most important things to have are all the cables and sensors / adaptors associated with the test set. all the adaptors can probably be found at a hardware / home depot / loewe's type stores. I used to use my units STE-ICE all the time: 1. because the equipment was set up for a STE-ICE and 2. because the unit lacked any decent Electrical testers (anolog multimeters). To put things in perspective, a STE-ICE is to a modern digital multimeter as a Pentium computer is to a Commadore 64. :D rofl
 

TheBuggyman

New member
663
5
0
Location
Fredericksburg, Virginia
Crazyguyla said:
One thing is to have the equipment, another thing is to know how to operate it. The STE-ICE is a very simple piece, althogh slightly confusing piece of equipment to use. If the STE-ICE still has the flip cards still attached, the startup and simple tests are listed. Most updated manuals will have STE-ICE procedures for that perticular vehicle. The most important things to have are all the cables and sensors / adaptors associated with the test set. all the adaptors can probably be found at a hardware / home depot / loewe's type stores. I used to use my units STE-ICE all the time: 1. because the equipment was set up for a STE-ICE and 2. because the unit lacked any decent Electrical testers (anolog multimeters). To put things in perspective, a STE-ICE is to a modern digital multimeter as a Pentium computer is to a Commadore 64. :D rofl
I realize that this is an antiquated unit, but it looks cool! I got a complete kit recently with everything in it except for the good manuals. It has the flip cards and to be honest, I don't think that anything in the kit has ever been used! :shock:
Heck, my cell phone has more computing power than the STE/ICE but a tool like this is unique and it will complement the whole military vehicle experience and maybe it will come in handy one day! :wink:
 

Crazyguyla

Active member
817
124
43
Location
Altus, OK
It is a great piece of equipment. I've been trying to get my hands on a complete one for years. It can be used to troubleshoot the 25 amp charging system. You could always request a manual thru proper channels. The proper channels are printed inside the manual, if that isn't a catch 22. Have you tried using it? Most test require a clibration/offset value to be checked before running the test. It's really simple to use, just takes a little patience.
 

Gerardo8808

New member
1
0
0
Location
Dayton Nv
Ok I Work for a Company that does testing for Military and private and they have one of these STE/ICE-R and want me to find someone who Calibrated them Please advise thank you
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks