Hwhomes
New member
- 72
- 0
- 0
- Location
- Moses Lake WA
Anyone built a standard receiver hitch for their truck? Pictures? I've a boat that needs towing.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Receiver Hitch
- Thread starter Hwhomes
- Start date
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
Here's the setup Wehring did for his. I think it's a pretty good looking arrangement and plan to steal the idea if I get the M1078 I want.
Gunnermac
Chief
- 383
- 107
- 43
- Location
- Athens Ga.
I used a hitch for a Ford F250/350. Had to cut 2 inches(I think) out and re weld. It is several inches below the military hitch and pulls most trailers level.
- 1,079
- 57
- 48
- Location
- New Palestine Indiana
I used a hitch off of a Ford 550 and a 10" dropped ball.
Attachments
Hwhomes
New member
- 72
- 0
- 0
- Location
- Moses Lake WA
It does look nice but I am concerned about the lack of support to prevent side to side movement of the trailer tongue.
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
I believe that's what the angle iron braces are for.
Hwhomes
New member
- 72
- 0
- 0
- Location
- Moses Lake WA
They appear to go back at a very shallow angle. I would be concerned if I was the one towing a heavy trailer with that hitch.
droprat
Member
- 193
- 7
- 18
- Location
- Las Cruces, NM
My son and I fab'd this hitch up last summer. We pulled some pretty heavy rv's and boats thru deep beach sand at one of our lakes here in NM. We were also able to to still pull our M105 with all the camping gear with no issues!
- 18,541
- 5,852
- 113
I like your use of the existing Pintle to engage the dangling Lunette. Do you have any photos of the attachment points where the diagonal braces attach to the frame??
My guess is that they are Pinned attachment points to make the whole assembly detachable and therefore stowable. Thanks.
John
acropilot
Member
- 74
- 1
- 8
- Location
- Santa Ynez, CA
That is a pretty cool set up. The diagonals are attached to an existing pivot point? I'll have to look at my truck. Great idea.
aheilmann68
Member
- 228
- 1
- 18
- Location
- North NJ
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
Not mine. This was done by Justin Wehring (user ID wehring) for this unit before going on the MVPA Convoy last year. He also has a setup to hook a gooseneck trailer to it.
Ukraine Train
New member
- 111
- 1
- 0
- Location
- Cleveland OH
Great idea! I see a used hitch on CL for $70; I think I will do the same as you. Did you just have to drill holes in the frame for this to fit up?
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Houston, TX
I am also interested in adding one to mine.
- 1,079
- 57
- 48
- Location
- New Palestine Indiana
Yes!
Hoefler
Active member
- 1,096
- 20
- 38
- Location
- White Bear Lake,MN
Made mine for M36A3
Pete
Pete
Attachments
acropilot
Member
- 74
- 1
- 8
- Location
- Santa Ynez, CA
Nice Work. Looks Great.
dsanderlmtv
Member
- 65
- 33
- 18
- Location
- Elephant Butte, NM.
Here is the hitch I made for my LMTV, going to hook up my boat this weekend and test it out. I will post some pics of the tow vehicle soon to follow.
droprat
Member
- 193
- 7
- 18
- Location
- Las Cruces, NM
My son and I built and tested this hitch last
Sumner! My son saw a weak point on most of these hitches being built! U NEED A Brace behind hitch!