Halfshaft bolts

[Ang2gna]

Can someone please tell me the size and hardness of the bolts that connect to the rotor? I replaced my left front halfshaft today and I want to replace them. Do I also need to replace the bolt that attaches it to the hub? Last one, I promise. The bolts on the rotor only had the split lock washer on them. I ordered nords because I swear I remember reading somewhere to use them instead. Am I right? Thanks in advance!


Sent from my iPhone using Tapatalk

 

[Royalpower]

I really don't know the answer to your question. However, when I replaced my I just put the old stuff back on and it was good to go.

 

[BLK HMMWV]

The 6 bolts used to hold the half shaft to the rotor are metric they get the Nordloc's. The single bolt that holds the splined end into the hub is a standard not metric bolt that gets a split washer type lock washer.
Make sure you follow the torque specs and use lock tight
I would strongly recommend you buy the TM's related to your MV or use the TM section hear on SS.
Here is another source of information for you
http://www.flashoffroad.com/Maintenance/halfshaft/halfshaft_replace.htm

While it is geared more to the civi version allot of good info relates to HMMWV as well

http://www.flashoffroad.com/humdefault.htm

 

[79f250guy]

Just replaced all mine. The bolts are M10-1.5 x 35mm class 10.9

 

[Ang2gna]

Thanks everyone! I do have the TMs. I don't know why I typed that I didn't know the bolt size because I had that, I just didn't know the hardness of the bolt. I didn't want to buy a bolt that would end up snapping. Thanks for the answer to the hardness. I think next time I am going to buy the bolts from a vendor as opposed to searching for them in the store.


Sent from my iPhone using Tapatalk

 

[Retiredwarhorses]

Thanks everyone! I do have the TMs. I don't know why I typed that I didn't know the bolt size because I had that, I just didn't know the hardness of the bolt. I didn't want to buy a bolt that would end up snapping. Thanks for the answer to the hardness. I think next time I am going to buy the bolts from a vendor as opposed to searching for them in the store.


Sent from my iPhone using Tapatalk

those bolts can only be purchased from distributors. The hardware stores don't stock that head size.

 

[Ang2gna]

Thanks warhorse.


Sent from my iPhone using Tapatalk