• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M149a2 rear hose Bibb/faucet

two.fiveM35

Active member
1,234
11
38
Location
Victoria , Texas
The rear faucet on my water buffalo wouldn't close, so I thought I'd take it apart and see what was wrong. The o ring seemed good and it seems like it seated in it spot but still leaked. Took it apart 3 times and them finally saw that the tube had a split. Are these available anywhere? I searched the web but could find anything. Are there an 1 1/4" regular hose bibs out there that will work? I have a cap on it now, but I'd rather have a working faucet? Anybody else have this issue?IMG_0677.jpgIMG_0678.jpg
 

glcaines

Well-known member
3,917
2,608
113
Location
Hiawassee, Georgia
Likely it was split from freezing water. When I got my M149A2, both the rear and front faucets and a brass T were split and had to be replaced. I found the faucets on Ebay. The front was NOS and ~$35.00 and the rear was NOS and ~$25.00. I've seen the rear faucets on Ebay off and on for several years. I would keep looking and also see if someone is parting out a water buffalo. If you have the stainless tank, these are great water buffalos.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks