• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What have you done to your 5 ton this week?

MAdams

MAdams

Active member
380
132
43
Location
San Dimas, CA
I mounted up 8 16.00R20's this weekend. I had all the wheels, tires and beadlocks pressure washers and ready to go. I got down to 27 min a tire but in this video it took my 32min total. I was having a heck of a time with the beadlock. The video might be boring to most of you but all my friends were asking.

https://www.youtube.com/watch?v=M9zKVrfrf_E
 
Another Ahab

Another Ahab

Well-known member
17,999
4,556
113
Location
Alexandria, VA
MAdams said:
I mounted up 8 16.00R20's this weekend. I had all the wheels, tires and beadlocks pressure washers and ready to go. I got down to 27 min a tire but in this video it took my 32min total. I was having a heck of a time with the beadlock. The video might be boring to most of you but all my friends were asking.
Click to expand...
gimpyrobb said:
Its always like that. The first one takes 3xs as long as all the others!
Click to expand...


curve.jpg
 
Swamp Donkey

Swamp Donkey

The Engineer
Steel Soldiers Supporter
1,450
120
63
Location
Gray, GA
I added a 5 drawer toolbox to get my hand tools out of the main box. I never liked the idea of a toolbox inside a toolbox, which is what I have had for a while. Having to empty the box to get the lid on the other box open is a bit annoying.

20170304_081703.jpg

20170304_081726.jpg

20170304_081821.jpg
 
Swamp Donkey

Swamp Donkey

The Engineer
Steel Soldiers Supporter
1,450
120
63
Location
Gray, GA
twisted60 said:
Very nice Donkey, I'd buy one. Great idea.
Click to expand...
https://www.amazon.com/gp/aw/d/B000MK5LWA/ref=ya_aw_od_pi?ie=UTF8&psc=1

I've always like UWS products. Made in the USA and built well. I'm not a fan of the Brite-tread on my truck but all the smooth steel boxes I messed with were flimsy and I didn't like how the door sealed on those. Pricey little box but options were limited for putting something with drawers in this spot. My heart skipped a beat when I first hit that shiny aluminum with the wire wheel to prep for paint. It was all better though once the 1st coat of green was applied. :mrgreen:
 
fuzzytoaster

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,299
3,132
113
Location
Fort Worth, Texas
2017-03-07 16.12.10.jpg2017-03-07 16.12.17.jpg2017-03-07 16.13.29.jpg

Got the Eyecon lights installed with some tips from M35A2-AZ. I had planned the setup since I saw the kit but he beat me to installing it. :wink: Anyway..onto the cab liner and HEMTT seats..
 
twisted60

twisted60

Well-known member
617
250
63
Location
Jupiter, Florida
Started a small project today that lead into a big pain... Had a small coolant leak at the thermostat housing, that started getting worse so I dove in thinking, change a couple gaskets and put it back together, well Murphy was having none of that. Everything came apart easy then I found the problem, 2 sheared bolts that to this point have claimed several drill bits and 1 easyout, they are really in there, so letting it soak in WD and back at it tomorrow.

Anyone have any tricks to get out stuck bolts ?
 
twisted60

twisted60

Well-known member
617
250
63
Location
Jupiter, Florida
I'll try PB Blaster, I think I have some around here, already bought a replacement easy out, hope I don't snap this one too. Worse case I'll drill hole larger and re-tap, so much for a quick easy fix...
 
gimpyrobb

gimpyrobb

dumpsterlandingfromorbit!
27,786
755
113
Location
Cincy Ohio
Got a welder?

Find a nut(as in nut and bolt) about the size of the bolt.
Weld it to the broken bolt through the center of the nut.
After its not red hot, turn the nut.

The heating and shrinking usually frees up said broken bolt.
 
Another Ahab

Another Ahab

Well-known member
17,999
4,556
113
Location
Alexandria, VA
twisted60 said:
Started a small project today that lead into a big pain... Had a small coolant leak at the thermostat housing, that started getting worse so I dove in thinking, change a couple gaskets and put it back together, well Murphy was having none of that. Everything came apart easy then I found the problem, 2 sheared bolts that to this point have claimed several drill bits and 1 easyout, they are really in there, so letting it soak in WD and back at it tomorrow.
Click to expand...
SO many projects morph into these kinds of nightmares.

I don't believe anymore that there IS such a thing as a "small" project.
 
fuzzytoaster

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,299
3,132
113
Location
Fort Worth, Texas
86m1028 said:
Hey Fuzzy
I bet the second time goes a lot faster....
How about swinging by & doing that setup on mine !

Looks really good
Click to expand...
Thanks, and no thanks haha. I've yet to wire it and that will be the fun part..

Another Ahab said:
Are those for area lighting, or more like hazard lights?

PS Sure do like your smoker. [thumbzup]
Click to expand...
Area lighting, there's also one in the rear below the tailgate.
 
You must log in or register to reply here.
110,879members
165,312threads
2,326,208posts
2,081online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks