Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
It looks great, NormB; nice work.
Puttered around to install some 1/2" birch plywood and sound insulation extending the tunnel cover. Held down with10-32 screws into rivnuts, side panels need fitting and insulation and rivnuts, will post pics when complte.
Thanks. I was going to put a radius on the side panels with a router before sealing/painting the wood. Not too sure how it'll hold up under future uses, but it's fun putting it together.It looks great, NormB; nice work.
You might consider tacking a length of half-round to the leading edge of that sheet of plywood. It could help keep that edge from splintering-up over time, as you're sliding stuff into the back of the rig there. Just a thought.
Who should do the write up?
By any chance, are you referring to the servo advance assembly pictured here? Btw, the IP is turned bottom-side-up in this illustration.
I was replying to the guy that installed all the LED lighting. apparently when you hit "reply" it just does it generally. Have to "reply with quote" thx
I ordered the same set from that seller a couple weeks ago. I got my set for $200. A friend of mine made an offer of $190 and got one too. Good deal on the tools since the cost on the kit is like $2500.
iirc it's the servo advance plunger....either way, pump has to come out.
Same price here.....about the time you buy 3 or 4 tools in the picture you are at this price.....you can always sell it on the way out.....I ordered the same set from that seller a couple weeks ago. I got my set for $200. A friend of mine made an offer of $190 and got one too. Good deal on the tools since the cost on the kit is like $2500.
Saw someone else selling the kit that is the next level up that includes those tools plus some others for about $1,000. Would have preferred to get that but I don't have that much extra coin laying around at the moment. Busy paying off all the other goodies I've bought for my truck.
I ordered the same set from that seller a couple weeks ago. I got my set for $200. A friend of mine made an offer of $190 and got one too. Good deal on the tools since the cost on the kit is like $2500.
Saw someone else selling the kit that is the next level up that includes those tools plus some others for about $1,000. Would have preferred to get that but I don't have that much extra coin laying around at the moment. Busy paying off all the other goodies I've bought for my truck.
epay vendor hooksy2012 , item
291946734933 Accepted my offer for $185
Thank You for the heads up Ryan & Jacob!
even at $200, quite a deal. As mentioned, just a few tools and you would be at the price. It "looked" like the spindle nut socket is in there also.View attachment 670834
Between you and my buddy I'm starting to feel like I overpaid! And here I was trying not to be an insulting low-baller!
It's 53lbs worth of tools so be ready!
Yep, lots of different seal and bearing drivers for just about everything from geared hubs to diff pinions. I figured with a 20+ year old truck, I'm certainly going to have to replace more seals than the one front diff output seal (which I had to make my own seal installer for) I've done so far and the rear pinion seal I need to do.
*redacted* ...wrong tool set. I'll just be excited in general.
