m931a2 5 inch turbo back exhaust

[mreuss222]

has anyone found a down pipe from the turbo that would fit?
looking to do 5 inch exhaust from turbo back. not just cut under the cab and hook up the 5 inch.

thanks

 

[simp5782]

has anyone found a down pipe from the turbo that would fit?
looking to do 5 inch exhaust from turbo back. not just cut under the cab and hook up the 5 inch.

thanks

No need to make multiple threads. The exhaust has been done before. Easiest way to do it is a 4in v band flange to a 5in adapter then the 5in pipe on a 45 degree. I did it on mine but my exhaust is routed totally different. Mine is on a non turbo truck but the same principle
Sent from my SM-G935P using Tapatalk

 

[mreuss222]

I did a search on down pipes didnt find anything.
I appreciate the info and photo

thanks

No need to make multiple threads. The exhaust has been done before. Easiest way to do it is a 4in v band flange to a 5in adapter then the 5in pipe on a 45 degree. I did it on mine but my exhaust is routed totally different. Mine is on a non turbo truck but the same principle

Sent from my SM-G935P using Tapatalk

 

[mreuss222]

found this for the stock hx40 turbo...


https://www.amazon.com/Diamond-Eye-...coding=UTF8&psc=1&refRID=QTAJAE1D9HNKTZKPDZYE DIAMOND EYE PERFORMANCE 221040 HX40 TURBO DOWNPIPE, 4IN; ALUM: 94-02 DODGE 5.9L CUMMINS - HX40 TURBO CONVERSION

 

[Jbulach]

Thats still only 4” and it would need major modification. Like simp said, adapt the turbo up to 5”, then two $30-40, 45 degree elbows will match the factory pipe perfectly. A piece of flex, a 90 and stack and you’ll have the rest. The 8.3 are supposed to be tolerable without a muffler...