catman393
New member
- 20
- 0
- 1
- Location
- Portsmouth, RI
Good Evening All,
I have a MEP-002A mounted on a 3x5 garden trailer that I normally keep inside my garage. I would love to be able to run it in the garage due to the noise level and not wanting to unreasonably disturb my neighbors.
While doing research online I found out that the M85 has 2 exhaust hoses for the MEP-003 generator. Digging through the tech manuals for the M85 ,and then cross referencing those parts online, I found that the exhaust hoses consist of the following (links to NSN Pages at the bottom) :
Union NW-P-521, Type 1, 1-1/4 IN NPT P/N: 6-1-8804-10 (Available at Home Depot for ~$14)
NIPPLE, PIPE NSN: 4730-00-144-4991; P/N: MS51953-148; 1.25" thread size; 2.5" length overall (Available at Home Depot for $3)
HOSE ASSEMBLY,METALLIC NSN: 4720-01-461-4681; P/N: 6-2-2419 ID: 1.5"; OD: 1.94" 180" (15 ft) long. (Made of unobtainium?)
Can anyone help me find the exhaust hose? From what I can find it has a 1-1/4" threading on one end to screw on to the nipple that is attached to the union. Does anyone have a picture of one? Does anyone have one in decent condition they'd want to give up?
Thank you all in advance for your time and assistance!
Nipple - https://www.wbparts.com/rfq/4730-00-144-4991.html
Hose - https://www.wbparts.com/rfq/4720-01-461-4681.html
I have a MEP-002A mounted on a 3x5 garden trailer that I normally keep inside my garage. I would love to be able to run it in the garage due to the noise level and not wanting to unreasonably disturb my neighbors.
While doing research online I found out that the M85 has 2 exhaust hoses for the MEP-003 generator. Digging through the tech manuals for the M85 ,and then cross referencing those parts online, I found that the exhaust hoses consist of the following (links to NSN Pages at the bottom) :
Union NW-P-521, Type 1, 1-1/4 IN NPT P/N: 6-1-8804-10 (Available at Home Depot for ~$14)
NIPPLE, PIPE NSN: 4730-00-144-4991; P/N: MS51953-148; 1.25" thread size; 2.5" length overall (Available at Home Depot for $3)
HOSE ASSEMBLY,METALLIC NSN: 4720-01-461-4681; P/N: 6-2-2419 ID: 1.5"; OD: 1.94" 180" (15 ft) long. (Made of unobtainium?)
Can anyone help me find the exhaust hose? From what I can find it has a 1-1/4" threading on one end to screw on to the nipple that is attached to the union. Does anyone have a picture of one? Does anyone have one in decent condition they'd want to give up?
Obviously I'd love to have "the right part" but if I can't get one then maybe I could make one. Does anyone know what kind of hose it was made of? Where I could get the "adapter" that allows the 1.5" ID hose to screw on to the 1-1/4" nipple?
Thank you all in advance for your time and assistance!
Nipple - https://www.wbparts.com/rfq/4730-00-144-4991.html
Hose - https://www.wbparts.com/rfq/4720-01-461-4681.html
Last edited: