VVFD
New member
- 22
- 1
- 3
- Location
- Vanderpool, Texas
Folks, just throwing this thread out to see if there is any interest...
We have a M1083A1 that we are converting to a heavy brush fire truck. Therefore, we are removing some components that will not be needed and to lighten the load.
At the same time we are repairing items on the truck to bring it up to a good operating condition. Steep learning curve to figure out things on this truck.
So far we have removed the Troop Seats from the bed, the rear tail panel, the boarding ladder, and the transport lift arms.
(some text removed by mod.)
VVFD
(Vanderpool Volunteer Fire Department) (Texas)
We have a M1083A1 that we are converting to a heavy brush fire truck. Therefore, we are removing some components that will not be needed and to lighten the load.
At the same time we are repairing items on the truck to bring it up to a good operating condition. Steep learning curve to figure out things on this truck.
So far we have removed the Troop Seats from the bed, the rear tail panel, the boarding ladder, and the transport lift arms.
(some text removed by mod.)
VVFD
(Vanderpool Volunteer Fire Department) (Texas)
Last edited by a moderator: