- 1,171
- 29
- 48
- Location
- Galesville, WI
Yes. We need to rebuild one for a spare or find a GPW.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Working on the M38 next.
- Thread starter hndrsonj
- Start date
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Transmission ready to be put back together Monday.
- 1,171
- 29
- 48
- Location
- Galesville, WI
Looking good!
I remember the first time I tried to reassemble one of those. Fought and fought with the roller bearings. Never thought it would ever go back together. An old mechanic told me to use wheel bearing grease to hold the rollers in place.
I remember the first time I tried to reassemble one of those. Fought and fought with the roller bearings. Never thought it would ever go back together. An old mechanic told me to use wheel bearing grease to hold the rollers in place.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Transmission complete!
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Today a buddy brought in his steam cleaner (hotsey). I did the engine compartment, underneath, transfer case and bell housing. I had a spot of mud on the side so I blasted it off and voila-it removed all layers of paint down to the original one. So I did the whole tub!
- 1,886
- 1,474
- 113
- Location
- Laramie County, Wyoming
.
I need one of those machines... we used one to clean our helicopters up in Iceland.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Ready to go in.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Today I decided the wiring is trashed and will be replaced. Also decided body is coming off.....
- 1,886
- 1,474
- 113
- Location
- Laramie County, Wyoming
.
Looks like the mess on my M37!
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
I quit counting at 30 cut wires.
- 3,220
- 390
- 83
- Location
- Tonopah, AZ
LOL, When I got my MB last year it had not wires.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Body off!
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
It seems parts needing cleaned/blasted never seems to end. Got a bunch blasted today (Thanks Jeff!). Hopefully frame gets done this week if weather cooperates. The replacement engine had several small CJ2A components which are slightly different and had to be changed. (Love doing stuff twice).
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Frame blasted and primed.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Frame painted and parts going on!
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
More parts blasted some in primer.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Rebuilt column, drag link, and transfer case.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Bumperette fixed and on, master cylinder, pedals, power pack in.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Hooked up a lot of smaller items. Had to disassemble the parking brake due to a spinning driveshaft stud.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
More parts installed. Pretty much ready to come home next week.
