I have joined the club ! And yes I have lost my mine !

[1951M1078]

I made it 3' x 4'. 12 sqft out of 128. It could be made smaller but I like taking a real shower. The control is more how much water you have. I have 42 gal.
The other plus is the cassette toilet. No black water tank.

 

[1951M1078]

Started the floor today.

 

[1951M1078]

Almost all of the 1 1/2" floor foam is down. And most of the 1/2" sub-flooring.

 

[1951M1078]

NOS tires got here today ! Thanks,Wes !

 

[dougco1]

Almost all of the 1 1/2" floor foam is down. And most of the 1/2" sub-flooring.

View attachment 760820View attachment 760821View attachment 760822View attachment 760823

Looks good Butt! The plywood subfloor is stronger if you install it perpendicular to the floor joist. Lessing the flexing that could crush your floor foam. Were you planning to install a 2nd layer? I don't mean to be critical but it's a nice project and don't want you to regret it.

 

[1951M1078]

The hard wood floor of the box runs front to rear so I ran the plywood left to right.

 

[coachgeo]

Looks good Butt! The plywood subfloor is stronger if you install it perpendicular to the floor joist. ....

see pics previously posted. They are perpendicular

https://www.steelsoldiers.com/showt...st-my-mine-!&p=2206023&viewfull=1#post2206023

 

[1951M1078]

Floor is closed up front. Now need to workout the rear area ? Not ready to do the rear door with the lift ?

 

[1951M1078]

Lots to do before Expo 2019. Worked on the sub-frame and bumper.



Needed to get this installed so I can workout the water a gray tank.

 

[1951M1078]

More work on the DOT bumper. And worked out the swing for offroad storage.

 

[coachgeo]

More work on the DOT bumper. And worked out the swing for offroad storage....

Like minds!!! Look forward to see how you do your lock in place that allows you to tow with it/provide slow down of car that rear ends you just enough to avoid their decapitation. Granted that rearender is sorta earning their own a Darwin award ... but then again they are someones mom, dad, or sibling... so guess it is worth it.

 

[1951M1078]

Just trying to keep all safe . Ok,safe,er ?

 

[1951M1078]

[FONT=&quot]A day of building brackets. Drilling a 1" hole takes some time.

[/FONT][FONT=&quot]


[/FONT][FONT=&quot]The short one's are 3/8" and the long are 3/4 (2 x 3/8"). I don't have anything over that. My bad. On the long,it will pass-through the 1/4 x 3 x 3 . Will slot the bumper and weld it in place. Will be a pull point that will end at the 1" point in the chassis. Bore to come.[/FONT]

 

[1951M1078]

Parts all tacked.



Finish weld Wednesday .

 

[coachgeo]

Parts all tacked......

What's the plan for Port/Starboard stability... chains or?

 

[1951M1078]

Tow points.

have not added the bracing yet. May not until after the show ? Too much other stuff to do.

 

[1951M1078]

All welded up. But needed to pull something apart. I forgot about the lift on the back of the truck. Don't want to have a problem with the hitch !



Still need to add some bracing but that will come later.

 

[1951M1078]

Sub-frame welded and installed on box. Now on to the water holder.

 

[1951M1078]

This thing kicked my A$$ ! But its out and now to installing the tank !



Anybody need a pintel mount ?

 

[agazza2]

This thing kicked my A$$ ! But its out and now to installing the tank !

View attachment 762619View attachment 762620View attachment 762621View attachment 762622

Anybody need a pintel mount ?

Is that a 60 gallon fresh water tank?