• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

How to

gimpyrobb

dumpsterlandingfromorbit!
27,786
752
113
Location
Cincy Ohio
Try searching m819, or m246, or an m62 should work too. Only difference is a manual crane extension section.
 

EO2NMCB

Member
643
23
18
Location
DeSoto, MO
The 10 will explain how to engage the linkage to the left of the driver seat and the controls at the rear to choose between the crane or rear winch.
TM9-2320-260-10
 
Last edited:

Guyfang

Moderator
Staff member
Moderator
16,661
23,794
113
Location
Burgkunstadt, Germany
The 10 will explain how to engage the linkage to the left of the driver seat and the controls at the rear to choose between the crane or rear winch.
TM9-2320-260-10
if you look in the TM forum, the 5 ton and up , last page, last entry, all the TM's you need to use for the care and operation for your truck are there. The TM 9-2320-260-10 will explain rhe operation of the crane, in detail. It's the book we had to study before anyone would allow us to operate our wrecker.
 

Floridianson

Well-known member
Steel Soldiers Supporter
7,409
2,501
113
Location
Interlachen Fl.
Since your learning to operate it a good thing to do is check all gear boxes before hand. Then give the turn table a good greasing which is very easy with two people just watch your step.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks