Back2Wyo
Member
- 55
- 19
- 8
- Location
- Torrington Wy
Tonight I mounted up the new version of the console. I was able to fix up the bent corner from FedEx dropping the package. I have a hard top that has the center depressed from people sitting/standing on the cab roof. This made the installation harder.
I worked from the passenger side and got the front lip on top of the front windshield and the back up into the rear of the cab. I had to take the screw out of the center support at the rear.
With the center support free, I was able to push it toward the back of the cab roof and slip the edge of the console by it and get in into position. I had to use a longer sheet metal screw to re-secure the rear support. 2 new bolt to hold the console at the rear and it's not moving. I can put 2 screws on the front if I feel that I need it, but the console isn't moving.
Attached are photos of my install...![P6240076.jpg P6240076.jpg](https://www.steelsoldiers.com/data/attachments/527/527434-024fe0aee494339f06be9f94887b89d8.jpg)
![P6240077.jpg P6240077.jpg](https://www.steelsoldiers.com/data/attachments/527/527435-76421c0fcbdd81f5705141fbb083a1c7.jpg)
![P6240078.jpg P6240078.jpg](https://www.steelsoldiers.com/data/attachments/527/527436-617e915905de8bd1ae80a9e2823e7672.jpg)
![P6240079.jpg P6240079.jpg](https://www.steelsoldiers.com/data/attachments/527/527437-7c78cbdd890db7150d244853a922748d.jpg)
I've talked to TMG and let them know about the tight install I had due to the depressed cab roof.
I worked from the passenger side and got the front lip on top of the front windshield and the back up into the rear of the cab. I had to take the screw out of the center support at the rear.
With the center support free, I was able to push it toward the back of the cab roof and slip the edge of the console by it and get in into position. I had to use a longer sheet metal screw to re-secure the rear support. 2 new bolt to hold the console at the rear and it's not moving. I can put 2 screws on the front if I feel that I need it, but the console isn't moving.
Attached are photos of my install...
![P6240076.jpg P6240076.jpg](https://www.steelsoldiers.com/data/attachments/527/527434-024fe0aee494339f06be9f94887b89d8.jpg)
![P6240077.jpg P6240077.jpg](https://www.steelsoldiers.com/data/attachments/527/527435-76421c0fcbdd81f5705141fbb083a1c7.jpg)
![P6240078.jpg P6240078.jpg](https://www.steelsoldiers.com/data/attachments/527/527436-617e915905de8bd1ae80a9e2823e7672.jpg)
![P6240079.jpg P6240079.jpg](https://www.steelsoldiers.com/data/attachments/527/527437-7c78cbdd890db7150d244853a922748d.jpg)
I've talked to TMG and let them know about the tight install I had due to the depressed cab roof.