-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
turn signal cancel ring
- Thread starter m998tom
- Start date
- 150
- 37
- 28
- Location
- Burtonsville, MD.
I purchased the real deal I only like to do things the right way but someone told me you can use 2 screws to do the same function
rcamacho
Well-known member
- 770
- 850
- 93
- Location
- Bainbridge Island Wa
Have a pn#? Id spend 27$
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- 3,582
- 3,491
- 113
- Location
- Brooklyn, NY
So, I usually prefer OE/OEM. I called RWH, and he said I need to change out my steering column in addition to steering wheel to use OE ring. Lots a work. Lots a $.
SO. decided to make a wooden ring of correct size, cut in half and hold to the steering wheel with screws and epoxy, and drill a few holes to place plastic nails through to cancel the signal. I won't use screws as they will wear through the plastic in the canceling thingy.
When I make it, I will shoot a few pics.
SO. decided to make a wooden ring of correct size, cut in half and hold to the steering wheel with screws and epoxy, and drill a few holes to place plastic nails through to cancel the signal. I won't use screws as they will wear through the plastic in the canceling thingy.
When I make it, I will shoot a few pics.
- 14,639
- 4,818
- 113
- Location
- Buchanan, GA
I saw somewhere that someone had made one out of PVC pipe. I thought about getting one, but with having it setup as a slantback with X doors, that dang indicator light is blinding to me I never forget about it on the HMMWV.
- 1,200
- 457
- 83
- Location
- Spartanburg,SC
I installed a Grant steering wheel and adapter hub on my M1045A2. I just installed 2 roll pins in the process and it works great.
Wire Fox
Well-known member
- 1,252
- 161
- 63
- Location
- Indianapolis, Indiana
Ain't that the truth. The worst fate to suffer: needing to have your 4-way flashers on at night, rolling miles and miles down the highway. I just rest my left hand over the ****ed flasher indicator and drive one-handed until I need to actually turn. Otherwise, it's an hour of being blind 50% of the drive.
- 3,582
- 3,491
- 113
- Location
- Brooklyn, NY
Duct tape, painters tape, light bulb removal, an old sock, and even tinfoil can block out that light. Just sayin’
Last edited:
Wire Fox
Well-known member
- 1,252
- 161
- 63
- Location
- Indianapolis, Indiana
It's perfect in the daylight, which is 95% of my driving, so no sense in permanent modification/disabling. I still want to see the blink at night, just not as bright... Maybe I'll make a second little cap for night use, or just slap a piece of tape on the top of it just to not be beamed in the face.
Sent from my Nokia 6.1 using Tapatalk
- 3,582
- 3,491
- 113
- Location
- Brooklyn, NY
Might I suggest a few thin coats of dark green automotive spray paint? Just like with hidden rear lights on modified classic cars, it will darken the light but not totally kill it. Or a few pieces of 30% window tinting
papakb
Well-known member
- 2,285
- 1,185
- 113
- Location
- San Jose, Ca
Maybe a good opportunity for someone with a 3D printer?
papakb
Well-known member
- 2,285
- 1,185
- 113
- Location
- San Jose, Ca
Maybe a good opportunity for someone with a 3D printer! Something in a pleasing shade of green?
rcamacho
Well-known member
- 770
- 850
- 93
- Location
- Bainbridge Island Wa
rcamacho
Well-known member
- 770
- 850
- 93
- Location
- Bainbridge Island Wa
Anyone have pictures or a mockup?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- 1,710
- 2,265
- 113
- Location
- Rosamond, CA
Nothing a little black tape wouldn't fix. Wrap the bulb or LED so only the tip is clear or slip a plastic sippy straw over it or peice of shrink sleeve or paint it out a bit or ....
Cat skinning is easy. Light dimming easier, CAMO
Cat skinning is easy. Light dimming easier, CAMO