Rear shoulder belt install

[Dayron84]

I purchased a NOS rear shoulder belt kit for the humvee ( a little added safety for the kids) I know I have to cut the rear curtain for the bump outs but I’m not clear exactly where to cut. If anyone else has done this I sure would appreciate some advice so I don’t screw it up


Sent from my iPhone using Tapatalk

 

[juanprado]

4 man rear curtains usually have the extra piece pocket already on them, best to find one with it as the kit will have snaps for it and to keep you better weather proofed

 

[Dayron84]

4 man rear curtains usually have the extra piece pocket already on them, best to find one with it as the kit will have snaps for it and to keep you better weather proofed

My curtain has the pocket. I just need need to know where to cut

Sent from my iPhone using Tapatalk

 

[SchmidtLegal]

My curtain has the pocket. I just need need to know where to cut

Sent from my iPhone using Tapatalk

On the back of the pocket is a horizontal retaining strap of plastic, cut those off to expand the pocket. On the inside of the curtain, cut slits on either side of the inside of the pocket to allow for the seat belt harness to slide freely. Its counter intuitive, but its what has to be done. once you make those cuts, it should slide over the aluminum seat belt bracket and attach in the back with the thumb twist.

 

[Dayron84]

Can anyone tell me where these go? No instructions with this kit


Sent from my iPhone using Tapatalk

 

[juanprado]

those go under the fender to reinforce the bracket that holds the reel. Instructions are located in the tm's under the mwo ( maintenance work order updates)

I don't recall the number but they all should be listed with links to the individual ones.

 

[Dayron84]

those go under the fender to reinforce the bracket that holds the reel. Instructions are located in the tm's under the mwo ( maintenance work order updates)

I don't recall the number but they all should be listed with links to the individual ones.

Makes sense now. Thanks!


Sent from my iPhone using Tapatalk

 

[juanprado]

look on figure 36 for the rear reinforcement plate illustration on the attached mwo

 

[Dayron84]

This is the part that I need to remove correct?


Sent from my iPhone using Tapatalk

 

[Dayron84]

Anyone??


Sent from my iPhone using Tapatalk

 

[Dayron84]

Bump


Sent from my iPhone using Tapatalk