JPMcCormick1
Member
- 32
- 21
- 8
- Location
- AZ
I have a 2003 M10445A2 that I have had for a year now and it has been in limp mode since I purchased it from the government. I have had several people look at it, replaced Transmission control module, protective control box, transmission relay, speed sensors and so forth. When I purchased it the Trans light indicator was missing so I purchased a new one. Whenever I start the vehicle the trans light does not come on. I even tried jumping the J2 A and E connector and no Trans light. I do get the TC control light come on when I put her in L or HL. It appears to me that the transmission control module is not getting power which could indicate why she is in limp mode. Today I decided to look at the battery connections and noticed something unusual. If you look at the first picture top left there is some wiring that goes to the relay box and then there are some cut wires off that same wiring that I did not first notice because they were hidden underneath the sheath. I dug them out and feel that this could be why the transmission control module is not getting any power. Does anyone know where these wires are suppose to go and why they might have been cut in the first place.
Attachments
-
2.8 MB Views: 303
-
1.6 MB Views: 277