• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Mep-1050, mep-1051, 4-1050, 4-1051

m-35tom

m-35tom

Well-known member
Supporting Vendor
3,021
222
63
Location
eldersburg maryland
These are 15kw sets and all have Yanmar 4TNV84T engine and are made by Cummins Power Generation. anyone have one? i need the numbers from the starter since i have one with no starter and there appears to be almost no information available.
thanks, tom
 
m-35tom

m-35tom

Well-known member
Supporting Vendor
3,021
222
63
Location
eldersburg maryland
no that is not even close!! i am pretty sure it takes something close to a 9 tooth pinion. the yanmar engine does not have a yanmar flywheel housing or flywheel or starter. it has am adapter for the generator that is not yanmar. the engines were supplied with only crank end open. so need to actually find someone with one to get numbers.
thanks for the try, i have been looking for a week and cannot even find a parts manual for this generator. it does not use a yanmar starter.
 
Last edited:
Daybreak

Daybreak

2 Star Admiral
Steel Soldiers Supporter
1,522
770
113
Location
Va
Howdy,
Tm's needed
TM 9-6115-751-10
TM 9-6115-751-24&P

The starter for a MEP-1030 5kw, and MEP-1040 10kw is nsn 6110015958949 cage 44940 p/n 11.131.457 STARTER, MOTOR, 24 VOLT.
They talk about using a lot of the same system to design the AMMPS units. The starter then again could be the same for the MEP-1050.

OK, I just looked it up, and it comes up showing the same starter for "Starter motor 24v, 5/10/15kw"
p/n 0191-2382 cummins power
p/n 04-20148 cummins power, and DOD
p/n 11.131.457 mahle letrika d.o.o.
p/n 11.131.457 cummins power

It says CENTRAL DIESEL, INC., 4600 DEEPWATER TERMINAL RD, RICHMOND, VA, 23234-2211 just got a contract for 45 units on 7/11/16, delivery 11/7/16. They might be a source.
 
Last edited:
rustystud

rustystud

Well-known member
9,279
2,984
113
Location
Woodinville, Washington
Daybreak said:
Howdy,
Tm's needed
TM 9-6115-751-10
TM 9-6115-751-24&P

The starter for a MEP-1030 5kw, and MEP-1040 10kw is nsn 6110015958949 cage 44940 p/n 11.131.457 STARTER, MOTOR, 24 VOLT.
They talk about using a lot of the same system to design the AMMPS units. The starter then again could be the same for the MEP-1050.

OK, I just looked it up, and it comes up showing the same starter for "Starter motor 24v, 5/10/15kw"
p/n 0191-2382 cummins power
p/n 04-20148 cummins power, and DOD
p/n 11.131.457 mahle letrika d.o.o.
p/n 11.131.457 cummins power

It says CENTRAL DIESEL, INC., 4600 DEEPWATER TERMINAL RD, RICHMOND, VA, 23234-2211 just got a contract for 45 units on 7/11/16, delivery 11/7/16. They might be a source.
Click to expand...
Good job Daybreak !
 
m-35tom

m-35tom

Well-known member
Supporting Vendor
3,021
222
63
Location
eldersburg maryland
OK, That's a great start, now I need to cross that to something in the civ world and find it in 12 volt! Any ideas? None of those numbers mean anything to me.
 
m-35tom

m-35tom

Well-known member
Supporting Vendor
3,021
222
63
Location
eldersburg maryland
did you know there IS an hour meter? hidden inside under the back of the convenience outlet. i also wonder if all the wiring harness are the same for this series of generators. do you have a parts book?
 
m-35tom

m-35tom

Well-known member
Supporting Vendor
3,021
222
63
Location
eldersburg maryland
i have one with 200 hrs that i am stripping for parts, mostly wonder if the wiring is the same for all of them, i assume it may be.
 
1

1Y875

New member
13
3
3
Location
Pontiac mi
Looking for a picture of the the engine serial number plate for an MEP1030. hoping it shows the engine model. Any interest in a 12 volt starter for them? We are thinking of developing one
 
You must log in or register to reply here.
110,879members
165,307threads
2,326,150posts
1,562online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks