LMTV alternator upgrade max amps?

[PowerstrokeNC]

These are dual voltage 200 amp @ 28V and 100 amps at 14V. Dual winches that pull up to 285 amps each and radio gear. I have a 450 amp @ 28V but it is physically too large.

You have some of the 200amp versions? I am looking for one.....

 

[PowerstrokeNC]

Anybody know if the HMMWV 200amp dual volt version would fit?

 

[ZiggyO]

I have a few of the 200 amp upgrade kits.... complete kits with everything down to the nuts and bolts...... pm for details......

Z

 

[pangea]

I how much for 200 amp alternator

 

[charlesrg]

Did you install the 200Amp alternator ? Sean proved it fits now I'm wondering how much continuous power can we take out of it.

 

[19Detail]

...or be boring and have fabricated some new brackets to mount a second 24v commercial truck alternator or Generator Head dedicated as the AC power source. You could also piggyback a small generator with its own engine onto the truck somewhere. Good number of these are 1/3 the cost of the 200 amp alt. kit.

I always thought I would want more amps to run all the lights and what not. 1/3 the cost is a very compelling argument against it. Thank you for that.

 

[coachgeo]

I always thought I would want more amps to run all the lights and what not. 1/3 the cost is a very compelling argument against it. Thank you for that.

Hummer version 200amp dual alt fits with a little fab. See Seans video. I got a used one of flea by for this. Also will be running an APU and I will put the 100amp dual vault on it instead of its 12v.

 

[Ronmar]

Did you install the 200Amp alternator ? Sean proved it fits now I'm wondering how much continuous power can we take out of it.

unless you re-wire, the cable gauge suggests about a 200A limit...

 

[charlesrg]

unless you re-wire, the cable gauge suggests about a 200A limit...

Yep, Sean goes over the re-wring on the next video. I think he used some Welding cable.

Anyone tested this Alternators for how long they can output 100Amps at Idle and at 1200 RPM ?

 

[coachgeo]

Yep, Sean goes over the re-wring on the next video. I think he used some Welding cable.

Anyone tested this Alternators for how long they can output 100Amps at Idle and at 1200 RPM ?

this gives you some info on the 100 amp version
https://www.ceniehoff.com/Documents/Ctrl_Hyperlink/TG0017B_uid882013200562.pdf


same site can get you to other PDF's

 

[mechanicjim]

Yep, Sean goes over the re-wring on the next video. I think he used some Welding cable.

Anyone tested this Alternators for how long they can output 100Amps at Idle and at 1200 RPM ?

the N1387, the 210 amp HUMMWV ALT at engine idle(700-800RPM) is like 2100-2400 alternator RPM so it'll give 160 amps there(give or take) and at 1200 engine RPM that's 3600 alternator RPM it'll give just below 200 amps. at 3000 engine RPM the Alt will be at 6000 rpm and that's where the rating of 210 amps comes from. of course as they are made you will get less 24V amps when you add the 12V loads on. and if its heat soaked you might get a little less like 10 percent less than these numbers

 

[deckerfire]

I have a few of the 200 amp upgrade kits.... complete kits with everything down to the nuts and bolts...... pm for details......

Z

Whats the price

 

[ZiggyO]

Whats the price

That post was from 2017--- I haven't had any of those for years now.

Z