No start after wiring issue

[Tugger T]

Hey I’m new to owning a M818 5ton and it was running great and then I messed with some wires and may have shorted something. and now it spins over but doesn’t start. What all does the PCB control? Could it be bad and is there a way to jump around it to verify that it is? Thanks

 

[98G]

Did you pull the emergency fuel shutoff?

 

[Tugger T]

Did you pull the emergency fuel shutoff?

Well It started out me trying to fix my front marker lights and I found a wire hanging under the head light switch and where someone had had a blue connector so I jump it. I lost signals then I tried to start it and it just spins over and it acts like the fuel cut off is not powering up so I checked the power and it’s not getting power to the cut off on the injection pump. Could that have fried that box?

 

[Tugger T]

I fixed it thanks for the advice I got a lot of learning to do on these things

 

[Floridianson]

I fixed it thanks for the advice I got a lot of learning to do on these things

What was the fix? Inquiring minds want to know.

 

[Tugger T]

What was the fix? Inquiring minds want to know.

I found a wire on the starter switch was loose.